Hp ProLiant BL480c Server-Blade Uživatelský manuál Strana 24
- Strana / 96
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Hardware options installation 24
Hardware options installation
In this section
Introduction ........................................................................................................................................... 24
Hot-plug SAS or SATA hard drive option................................................................................................... 24
Processor option..................................................................................................................................... 25
Memory option ...................................................................................................................................... 32
Mezzanine card option........................................................................................................................... 36
HP Smart Array P400i Controller battery pack........................................................................................... 37
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
Hot-plug SAS or SATA hard drive option
The server blade supports up to four hot-plug SAS or SATA drives.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the
enclosure unless all hard drive and device bays are populated with either a component or a blank.
1. Remove the hard drive blank.
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs 7
- SAS and SATA hard drive LEDs 8
- System board components 9
- FBDIMM slot numbering 10
- System maintenance switch 10
- Accessing the redundant ROM 11
- Repeat steps 5 and 6 12
- Local I/O cable 13
- Operations 14
- Remove the server blade 15
- Remove the access panel 15
- Install the access panel 16
- In this section 17
- Installing a server blade 18
- Remove the blank 19
- Setup 20 20
- Remove the connector covers 21
- Connecting to the network 23
- Completing the configuration 23
- Introduction 24
- Processor option 25
- Memory option 32
- Installing FBDIMMs 35
- Mezzanine card option 36
- Cabling 39
- Network-based PXE deployment 43
- Deployment methods 44
- PXE deployment 45
- CD-ROM deployment 45
- Diskette image deployment 46
- SAN configuration 47
- Configuration tools 48
- Using RBSU 49
- Auto-configuration process 49
- Boot options 49
- Array Configuration Utility 50
- Management tools 52
- HP Systems Insight Manager 53
- Management Agents 53
- Redundant ROM support 54
- Diagnostic tools 55
- Integrated Management Log 56
- Array Diagnostic Utility 56
- Web-Based Enterprise Service 56
- Keeping the system current 57
- Care Pack 58
- Troubleshooting 59
- Important safety information 60
- Symptom information 61
- Service notifications 62
- Loose connections 62
- Troubleshooting flowcharts 62
- Start diagnosis flowchart 63
- General diagnosis flowchart 64
- Symptoms: 65
- POST problems flowchart 67
- OS boot problems flowchart 68
- Troubleshooting 70 70
- Possible causes: 71
- Redundancy failure 71
- Troubleshooting 72 72
- Battery replacement 73
- FCC rating label 74
- FCC logo, United States only 75
- Modifications 76
- Japanese notice 77
- BSMI notice 77
- Korean notice 78
- Laser compliance 78
- Battery replacement notice 78
- Electrostatic discharge 80
- Specifications 81
- Technical support 82
- Customer Self Repair 84
- Technical support 85 85
- Reparo feito pelo cliente 86
- Technical support 87 87
- Technical support 88 88
- Technical support 89 89
- Acronyms and abbreviations 90
- Version Control Agent 93
- Wired for Management 93
- Index 94 94
- Index 95 95
- Index 96 96
Související produkty a manuály pro Počítačový hardware Hp ProLiant BL480c Server-Blade
(100 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce