HP General IO Connectivity Instalační manuál stáhnout pdf (Strana 10)

Installation Overview & Planning

Installing HP Fabric Clustering System

Chapter 1

Screw locations are the same in the switch regardless of rail orientation.

Figure 1-7 Rail-to-Switch Attachment Locations

Figure 1-8 Attach Rail to Switch

Step 3. Repeat steps Steps 1 and 2 on the other side of the switch.

The two sliding rails should still be unattached.

Step 4. Loosely attach the switch with one screw through the front of each rail.

CAUTION Temporarily support the switch until the sliding rails are attached.

Figure 1-9 Loosely Attach Rail to Rack

CAUTION Do not let the switch hang unsupported from only the fixed rail flanges.

Attach rail to switch in

Bezel end

the (6) locations highlighted in white.

1 2 ... 5 6 7 8 9 10 11 12 13 14

Žádné komentáře

HP General IO Connectivity Instalační manuál Strana 10