Hp MSA Controllers Uživatelský manuál stáhnout pdf (Strana 40)

40 Connecting hosts

Two servers/one HBA per server/dual path

Connecting switch attach configurations

Dual controller configuration

Two servers/two switches

Connecting remote management hosts

The management host directly manages systems out-of-band over an Ethernet network.

1. Connect an RJ-45 Ethernet cable to the network management port on each P2000 G3 MSA System

controller.

2. Connect the other end of each Ethernet cable to a network that your management host can access

(preferably on the same subnet).

NOTE: Connections to this device must be made with shielded cables – grounded at both ends – with

metallic RFI/EMI connector hoods, in order to maintain compliance with FCC Rules and Regulations.

6Gb/s

Server 1

Server 2

Server 1

Server 2

6Gb/s

If using FC host ports instead of the iSCSI ports shown, then connect cables from

each switch to the relevant FC port, instead of the iSCSI port.

Server 1

Server 2

Switch A

Switch B

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 83 84

Žádné komentáře

Hp MSA Controllers Uživatelský manuál Strana 40