Hp NC365T 4-port Ethernet Server Adapter Uživatelský manuál stáhnout pdf (Strana 10)

Specifications 10

Specifications

HP NC365T specifications

Specification Value

Network Controller

Chipsets

Intel 82580 MAC

Bus Type x4 PCI-Express v2.0

Bus Width Four lane

On-board Memory 56 KB

Data Transfer Method Bus Master DMA

Boot ROM Support Yes

Management Capabilities PXE 2.2, ACPI 1.1a

Power Requirement 5.0 Watts @ 3.3v

Data Transmission Rate 10 Full/10 Half, 100 Full/100 Half, 1000 Full

Standards Supported IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3ad,

IEEE802.1p, IEEE802.1Q, IEEE802.3z, IEEE158, IEEE802.1as

Dimensions 10.92 cm x 6.86 cm [4.3 in x 2.7 in (L x W)] (without bracket)

Connector and Distances 10BASE-T: Category 3, 4, or 5 UTP 100 M (328 ft)

100BASE-TX: CAT5 UTP 100 M (328 ft)

1000BASE-TX: CAT5 UTP 100 M (328 ft)

Interrupts Supported Automatically configured

Temperature Range Operating: 0°C to 55°C (32°F to 131°F)

Storage: -65°C to 85°C (-85°F to 185°F)

Relative Humidity (non-

condensing)

Operating: 10% to 90%

Storage: 5% to 95%

Safety Compliance UL Mark (US and Canada)

CE Mark

EN 60590

RoHS (European Union)

UTP cable specifications

The NC365T adapter can use existing UTP CAT5 (or better) cable to deliver Gigabit Ethernet over

copper, according to the IEEE 802.3ab specifications. For new installations, CAT5e (enhanced CAT5)

cable is recommended.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Žádné komentáře

Hp NC365T 4-port Ethernet Server Adapter Uživatelský manuál Strana 10