HP Compaq dc7600 Uživatelská příručka stáhnout pdf (Strana 36)

2–20 www.hp.com Hardware Reference Guide

Hardware Upgrades

10. To install a new expansion card, slide the bracket on the end of

the card down into the slot on the back of the chassis and press

the card down firmly into the socket on the system board.

Installing an Expansion Card

✎

When you install an expansion card, make sure you press firmly on

the card so that the whole connector seats properly in the expansion

card socket.

11. Close the expansion card retention latch, making sure that it snaps

firmly into place.

12. Connect external cables to the installed card, if needed. Connect

internal cables to the system board, if needed. If the card requires

audio, connect the audio cable to the connector on the system

board labeled “Aux” (located towards the edge of the system

board in front of the PCI slots).

13. Replace the computer access panel.

14. If you normally lock the Smart Cover Lock, use Computer Setup

to relock the lock and enable the Smart Cover Sensor.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 68 69

Žádné komentáře

HP Compaq dc7600 Uživatelská příručka Strana 36