Hp EX490 MediaSmart Server Uživatelský manuál Strana 230

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 331
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 229
HP MediaSmart Server User's Guide
USB DRIVES, ESATA DRIVES, AND PORT
MULTIPLIERS
Add and Remove an External USB Drive, eSATA Drive, or
SATA Port Multiplier
You can add external USB disk drives to any of the HP MediaSmart Server’s four USB ports. You
can add either an eSATA drive or SATA port multiplier to the eSATA port.
Important
There are two parts to adding external drives: connect the drive to a port and then initialize the
drive so it becomes part of the total server storage.
In this article...
Connect an External USB Disk Drive
Connect an eSATA Disk Drive or SATA Port Multiplier
Connect an External USB Disk Drive
If you use a USB disk drive, it is recommended that you use a drive that conforms to USB 2.0 or
later.
1. Plug in the USB cable into one of the USB ports on the server.
2. To plug in and power up your external USB drive, see the documentation that came with your
USB disk drive.
Caution
The addition of multiple USB disk drives through an external USB hub is neither recommended
nor supported.
224
Zobrazit stránku 229
1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 330 331

Komentáře k této Příručce

Žádné komentáře