Hp ProLiant BL685c Server-Blade Uživatelský manuál Strana 24
- Strana / 93
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Hardware options installation 24
Hardware options installation
In this section
Introduction ........................................................................................................................................... 24
Hot-plug SAS or SATA hard drive option................................................................................................... 24
Processor option..................................................................................................................................... 26
Memory option ...................................................................................................................................... 31
Mezzanine card option........................................................................................................................... 33
HP Smart Array E200i Controller battery pack option................................................................................. 34
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
Hot-plug SAS or SATA hard drive option
The server blade supports up to two hot-plug SAS or SATA drives.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the
enclosure unless all hard drive and device bays are populated with either a component or a blank.
To install the component:
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs 7
- SAS and SATA hard drive LEDs 8
- System board components 9
- DIMM slots 10
- System maintenance switch 10
- Accessing the redundant ROM 11
- Local I/O cable 12
- Operations 13
- Remove the server blade 14
- Remove the access panel 14
- Remove the DIMM baffle 15
- Install the DIMM baffle 15
- Install the access panel 15
- Operations 16 16
- Overview 17
- Installing a server blade 18
- Remove the blank 19
- Setup 20 20
- Remove the connector covers 21
- Connecting to the network 23
- Completing the configuration 23
- Introduction 24
- Remove the hard drive blank 25
- Prepare the hard drive 25
- Processor option 26
- Memory option 31
- Advanced ECC memory 32
- DIMM installation guidelines 32
- DIMM population order 32
- Installing DIMMs 32
- Mezzanine card option 33
- Cabling 37
- In this section 40
- Network-based PXE deployment 41
- Deployment infrastructure 42
- Deployment methods 43
- CD-ROM deployment 44
- Diskette image deployment 45
- Configuration tools 46
- HP ROM-Based Setup Utility 47
- Array Configuration Utility 48
- Management tools 49
- Erase Utility 50
- HP Systems Insight Manager 50
- Management Agents 50
- Redundant ROM support 51
- Diagnostic tools 52
- Survey Utility 53
- Integrated Management Log 53
- Array Diagnostic Utility 53
- Keeping the system current 54
- ProLiant Support Packs 55
- Care Pack 55
- Troubleshooting 56
- Important safety information 57
- Symptom information 58
- Service notifications 59
- Loose connections 59
- Troubleshooting flowcharts 59
- Start diagnosis flowchart 60
- General diagnosis flowchart 61
- Symptoms: 62
- POST problems flowchart 64
- OS boot problems flowchart 65
- Troubleshooting 67 67
- Possible causes: 68
- Redundancy failure 68
- Troubleshooting 69 69
- Battery replacement 70
- FCC rating label 71
- FCC logo, United States only 72
- Modifications 73
- Japanese notice 74
- BSMI notice 74
- Korean notice 75
- Laser compliance 75
- Battery replacement notice 75
- Electrostatic discharge 77
- Specifications 78
- Technical support 79
- Customer Self Repair 81
- Technical support 82 82
- Reparo feito pelo cliente 83
- Technical support 84 84
- Technical support 85 85
- Technical support 86 86
- Acronyms and abbreviations 87
- Web-Based Enterprise Service 90
- Wired for Management 90
- Index 91 91
- Index 92 92
- Index 93 93
Související produkty a manuály pro Počítačový hardware Hp ProLiant BL685c Server-Blade
(118 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce