Hp ProLiant SL4540 Gen8 Server Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačový hardware Hp ProLiant SL4540 Gen8 Server. HP ProLiant SL4540 Gen8 Server User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 78
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
HP ProLiant SL4540 Gen8 Server Node
User Guide
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the
servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.
Part Number: 683991-004
February 2014
Edition: 4
Zobrazit stránku 0
1 2 3 4 5 6 ... 77 78

Shrnutí obsahu

Strany 1 - User Guide

HP ProLiant SL4540 Gen8 Server Node User Guide Abstract This document is for the person who installs, administers, and troubleshoots servers and st

Strany 2

Component identification 10 drivers, and applications. Many crashes can freeze a system, requiring you to do a hard reset. Resetting the system eras

Strany 3 - Contents

Component identification 11 Front panel components • 1 node chassis Item Description 1 Node drives 2 LFF drive health LED 3 LFF drive UID 4 Driv

Strany 4 - Contents 4

Component identification 12 Item Description 1 Node 1 2 Node drives 3 LFF drive health LED 4 LFF drive UID 5 Drives controlled by node 1 P420i arr

Strany 5 - Contents 5

Component identification 13 Item Description 16 Node UID LED button Hard drive display LEDs LED behavior Definition Off • Drive is not install

Strany 6 - Component identification

Component identification 14 LED behavior Definition Green Storage system health is good. Amber System requires service or a fault is detected. Chec

Strany 7

Component identification 15 • 2 node chassis Item Description 1 System fans 2 I/O module for node 1 3 Management module 4 Power supplies 5 I/O m

Strany 8 - System board components

Component identification 16 I/O module connectors and LEDs • 1 Gb I/O module Item Description 1 Activity LED 2 1Gb connectors 3 I/O module hea

Strany 9 - NMI jumper

Component identification 17 Item Description 5 Serial connector 6 Link LED 7 Activity LED 8 Activity LED 9 Link LED Description Status Health L

Strany 10 - Personality board components

Component identification 18 Description Status UID LED Blue = Activated Flashing blue = System is being remotely managed. Off = Deactivated Healt

Strany 11 - Front panel components

Component identification 19 2 node drive bay numbering 3 node drive bay numbering

Strany 12 - • 3 node chassis

© Copyright 2012, 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only war

Strany 13 - Hard drive display LEDs

Component identification 20 Power supply LED Power LED Status Off • No AC power to power supply units. Check the AC power cord. • AC

Strany 14 - Rear panel components

Operations 21 Operations Powering up the system 1. Connect the power cables to the power supplies. 2. Connect the power cables to the power source

Strany 15 - • 2 node chassis

Operations 22 c. Remove the node. CAUTION: To avoid damage to the device, do not use the removal handle to carry it. 3. Place the node on a

Strany 16 - • 10 Gb I/O module

Operations 23 4. Slide the access panel toward the rear of the node, and then lift to remove the panel. Install the access panel 1. Place the acc

Strany 17

Setup 24 Setup Optional installation services Delivered by experienced, certified engineers, HP Care Pack services help you keep your servers up and

Strany 18 - Device bay numbering

Setup 25 Space and airflow requirements To allow for servicing and adequate airflow, observe the following space and airflow requirements when decid

Strany 19 - 3 node drive bay numbering

Setup 26 Power requirements Installation of this equipment must comply with local and regional electrical regulations governing the installation of

Strany 20 - Fan LED

Setup 27 WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor.

Strany 21 - Operations

Setup 28 Configuring the chassis For further information on setting up and configuring your system, see the HP ProLiant SL4500 Series Quick Setup In

Strany 22 - Remove the access panel

Setup 29 For additional system software and firmware updates, download the HP Service Pack for ProLiant from the HP website (http://www.hp.com/go/sp

Strany 23 - Install the access panel

Contents 3 Contents Component identification ...

Strany 24 - Optimum environment

Hardware options installation 30 Hardware options installation Introduction If more than one option is being installed, read the installation instru

Strany 25 - Temperature requirements

Hardware options installation 31 5. Remove the heatsink blank. IMPORTANT: To avoid forcibly ejecting the processor, open the levers slowly. 6

Strany 26 - Rack warnings

Hardware options installation 32 7. Remove the clear processor socket cover. Retain the processor socket cover for future use. 8. Install the proc

Strany 27 - Installing hardware options

Hardware options installation 33 CAUTION: Do not press down on the processor. Pressing down on the processor may cause damage to the processor s

Strany 28 - Configuring the chassis

Hardware options installation 34 12. Install the heatsink. 13. Install the access panel (on page 23). 14. Install the node into the chassis (&quo

Strany 29 - Registering the server

Hardware options installation 35 Memory subsystem architecture The memory subsystem in this node is divided into channels. Each processor supports t

Strany 30 - Processor option

Hardware options installation 36 DIMM identification To determine DIMM characteristics, use the label attached to the DIMM and the following illustr

Strany 31

Hardware options installation 37 Advanced Memory Protection options are configured in RBSU. If the requested AMP mode is not supported by the instal

Strany 32

Hardware options installation 38 Population order For memory configurations with a single processor or multiple processors, populate the DIMM slots

Strany 33

Hardware options installation 39 Removing a drive blank Remove the component as indicated. CAUTION: To prevent improper cooling and thermal dam

Strany 34 - Memory options

Contents 4 Hot-plug hard drive guidelines ...

Strany 35

Hardware options installation 40 3. Install the hard drive. 4. Determine the status of the drive from the drive LED definitions ("Hot-plug dr

Strany 36 - Memory configurations

Hardware options installation 41 CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines can cause hardware da

Strany 37

Hardware options installation 42 5. Install the TPM board. Press down on the connector to seat the board ("System board components" on pag

Strany 38 - Installing a DIMM

Hardware options installation 43 • Always store the recovery key/password in multiple locations. • Always store copies of the recovery key/passwor

Strany 39 - Removing a drive blank

Cabling 44 Cabling Personality board cabling Item Description 1 NIC 2 (1 Gb) 2 NIC 1 (1 Gb) 3 iLO HDD data LED cabling The HDD data LED cable

Strany 40 - Controller options

Cabling 45 SATA cabling The SATA cables route over the HDD data LED cable and underneath the power cable. Connect and route the cables in the follo

Strany 41

Cabling 46 RPS cabling The RPS cable routes with the front LED cable underneath the SATA board power cable and USB/VGA cable. Connect and route the

Strany 42

Cabling 47 SATA board power cabling The SATA board power cable routes on top of the RPS cable and front LED cable, and underneath the USB/VGA cable

Strany 43

Software and configuration utilities 48 Software and configuration utilities Server mode The software and configuration utilities presented in this

Strany 44 - Cabling

Software and configuration utilities 49 iLO enables and manages the Active Health System (on page 49) and also features Agentless Management. All ke

Strany 45 - Internal power cabling

Contents 5 Safety and regulatory compliance ...

Strany 46 - Front LED cabling

Software and configuration utilities 50 The data that is collected is managed according to the HP Data Privacy policy. For more information see the

Strany 47 - USB/VGA cabling

Software and configuration utilities 51 HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS i

Strany 48 - HP iLO Management

Software and configuration utilities 52 HP Insight Remote Support is available as part of HP Warranty, HP Care Pack Service, or HP contractual suppo

Strany 49 - Active Health System

Software and configuration utilities 53 HP Smart Update Manager HP SUM is a product used to install and update firmware, drivers, and systems softwa

Strany 50 - Intelligent Provisioning

Software and configuration utilities 54 Auto-configuration process The auto-configuration process automatically runs when you boot the server for th

Strany 51 - Erase Utility

Software and configuration utilities 55 Utilities and features Array Configuration Utility ACU is a utility with the following features: • Runs as

Strany 52 - HP Service Pack for ProLiant

Software and configuration utilities 56 Option ROM Configuration for Arrays Before installing an operating system, you can use the ORCA utility to c

Strany 53 - HP ROM-Based Setup Utility

Software and configuration utilities 57 USB support HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provid

Strany 54 - Configuring AMP modes

Software and configuration utilities 58 Software and firmware Software and firmware should be updated before using the server for the first time, un

Strany 55 - Utilities and features

Troubleshooting 59 Troubleshooting Troubleshooting resources The HP ProLiant Gen8 Troubleshooting Guide, Volume I: Troubleshooting provides procedur

Strany 56 - Automatic Server Recovery

Component identification 6 Component identification Node component identification Front panel components Item Description 1 Hard drive bay 1 2 Ha

Strany 57 - Keeping the system current

System battery 60 System battery If the node no longer automatically displays the correct date and time, you might have to replace the battery that

Strany 58 - ProLiant servers

Regulatory information 61 Regulatory information Safety and regulatory compliance For safety, environmental, and regulatory information, see Safety

Strany 59 - Troubleshooting

Electrostatic discharge 62 Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions yo

Strany 60 - System battery

Specifications 63 Specifications Environmental specifications Specification Value Temperature range* Operating 10°C to 35°C (50°F to 95°F) Ship

Strany 61 - Regulatory information

Support and other resources 64 Support and other resources Before you contact HP Be sure to have the following information available before you call

Strany 62 - Electrostatic discharge

Support and other resources 65 providers or service partners) identifies that the repair can be accomplished by the use of a CSR part, HP will ship

Strany 63 - Specifications

Support and other resources 66 Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus d'in

Strany 64 - Support and other resources

Support and other resources 67 HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu erfüllen,

Strany 65

Support and other resources 68 sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío y devolución de componentes

Strany 66 - Customer Self Repair

Support and other resources 69 Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pel

Strany 67

Component identification 7 Item Description Status Off = Deactivated 2 Node release button — 3 System Health LED Green = Normal Flashing amber =

Strany 68 - Reparo feito pelo cliente

Support and other resources 70

Strany 69

Support and other resources 71

Strany 70

Acronyms and abbreviations 72 Acronyms and abbreviations ABEND abnormal end ACU Array Configuration Utility ASR Automatic Server Recovery CSA Can

Strany 71

Acronyms and abbreviations 73 NMI nonmaskable interrupt NVRAM nonvolatile memory ORCA Option ROM Configuration for Arrays PCI-X peripheral compon

Strany 72 - Acronyms and abbreviations

Acronyms and abbreviations 74 SL-APM HP ProLiant SL Advanced Power Manager SPP HP Service Pack for ProLiant TMRA recommended ambient operating tem

Strany 73

Documentation feedback 75 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentat

Strany 74

Index 76 A access panel 22, 23 ACU (Array Configuration Utility) 48, 55 Advanced ECC memory 37, 54 airflow requirements 25 Array Configurati

Strany 75 - Documentation feedback

Index 77 health LEDs 11 HP Insight Diagnostics 50, 51 HP Insight Remote Support software 51 HP Service Pack for ProLiant 48, 50, 52 HP Smart

Strany 76 - Index 76

Index 78 S safety considerations 26, 57, 61, 62 safety information 57, 61 SAS drives 7 SATA cabling 45 scripted installation 52 series num

Strany 77 - Index 77

Component identification 8 System board components Item Description 1 HDD data LED backplane connector 2 Power connector 3 Processor socket 2 4 P

Strany 78 - Index 78

Component identification 9 Item Description 31 VGA connector 32 Front LED connector DIMM slots DIMM slots are numbered sequentially (1 through 6)

Komentáře k této Příručce

Žádné komentáře