Hp PC Uživatelský manuál stáhnout pdf (Strana 30)

24 Getting Started Guide

9 After the speakers are connected to the PC, configure the audio software for

sound output for your PC model:

• Type 3 connectors: See “Configuring audio output with Multi-channel

Sound Manager” on page 35.

• Type 6 connectors: See “Configuring audio output with Sound Effect

Manager” on page 37.

The following diagram shows a typical 2.1 audio installation:

Connecting 4.1 (4 speakers and a subwoofer)

audio speakers

To connect two front speakers, two rear speakers, and a subwoofer for four-channel

(4.1 speaker) output:

1 Turn off the PC.

2 Connect the front speaker cable to the lime-green Audio Line Out connector that

matches the back of your PC.

• Type 3 is three connectors

• Type 6 is six connectors

• Type S is a sound card connector

3 Connect the rear speaker cable to the black connector that matches the back of

your PC.

For type 3 connectors, the blue Audio Line In connector functions as a rear Line

Out when a multichannel audio configuration is activated.

4 Connect the cables to the audio system.

5 Connect the front and rear speakers to the subwoofer. Refer to the speaker

documentation.

OUT

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 119 120

Žádné komentáře

Hp PC Uživatelský manuál Strana 30