Hp DL185 Uživatelský manuál stáhnout pdf (Strana 48)

Contents 48

System Board Configuration

Processor

HP ProLiant DL185 G5 Server supports dual-processor operation. If a single processor is installed,

then use socket 0. When two processors are used, the server supports boot functions through the

processor installed in processor socket 0. However, if processor 0 fails, the system can’t boot up, and

if processor 1 fails, the system will automatically boots from processor 0 and provides a processor

failure message.

The processor socket supports 2P AMD Opteron 2000 series.

CAUTION: It is recommended to use processors of same speeds or cache sizes to prevent possible

server malfunction.

Figure 30 Processor Locations

WARNING: To reduce the risk of personal injury from hot surfaces, allow the heat sink and the

processor to cool before touching them.

NOTE: Before installing the processor, remove the air baffle.

To remove the air baffle:

1. Gently rock the air baffle up.

2. Take the air baffle out from the chassis.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 102 103

Žádné komentáře

Hp DL185 Uživatelský manuál Strana 48