Hp HDX 16 Uživatelský manuál Strana 92

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 146
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 91
Removal and replacement procedures 4–57
Remove the subwoofer:
1. Remove the subwoofer cable 1 from the clips 2 and routing channel built into the base enclosure.
2. Remove the two Phillips PM2.5×5.0 broadhead screws 3 that secure the subwoofer to the base enclosure.
The rubber grommets 4 should be inspected and replaced in the correct locations on the subwoofer. These
grommets are critical for satisfactory subwoofer performance.
3. Remove the subwoofer 5 by lifting it straight up.
Reverse this procedure to install the subwoofer.
Zobrazit stránku 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 145 146

Komentáře k této Příručce

Žádné komentáře