HP EliteDisplay S270c 27-in Curved Display Uživatelský manuál

HP 68.6 cm/27-inch Curved MonitorsUser Guide

3 Setting up the monitorTo set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, and th

3. Lift up the bottom of the display panel (1) and insert the stand into the slot on the back of the display panel until it clicks in place (2).Instal

Rear and side componentsComponent Function1 Menu button Press to open the OSD menu, select a menu item from the OSD, or close the OSD menu.2 Menu Plus

Connecting the cablesNOTE: The monitor ships with select cables. Not all cables shown in this section are included with the monitor.1. Place the monit

●Connect an HDMI cable to the HDMI port on the rear of the monitor and the other end to the HDMI port on the source device.●Connect an MHL cable to th

3. Connect an audio cable to the Audio-in jack on the rear of the monitor and the other end to the Audio-out jack on the source device.4. Connect one

Front panel controlsControl Function1 Speakers Provide premium audio sound.2 Power LED System on = whiteSystem off = offSleep mode = amberSleep timer

Adjusting the tiltTilt the monitor panel forward or backward to set it to a comfortable eye level.Mounting the monitor (select models)A VESA mounting

3. Lift up the bottom of the display panel (1), and then press the release latch (2) and slide the stand out of the slot on the display panel (3).Atta

4. To attach the monitor to a swing arm or other mounting device, insert four mounting screws through the holes on the mounting device and into the sc

© 2014 Hewlett-Packard Development Company, L.P.For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DT

NOTE: You can disable the power LED in the OSD menu. Press the Menu button on the right side of the monitor, and then select Power Control > Power

Installing a cable lockYou can secure the monitor to a fixed object with an optional cable lock available from HP.Installing a cable lock 15

4 Operating the monitorSoftware and utilitiesThe disc that comes with the monitor contains files you can install on the computer:●an .INF (Information

NOTE: You may need to install the digitally signed monitor .INF and .ICM files manually from the disc in the event of an installation error. Refer to

Downloading the softwareIf you prefer to download the My Display software, follow the instructions below.1. Go to http://www.hp.com/support and select

For additional information, refer to the HP Display Assistant User Guide included on the disc with your monitor.Downloading the softwareIf you prefer

Using the On-Screen Display (OSD) menuUse the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. You can access and

Menu button functionsPressing one of the three Menu buttons on the right side of the monitor activates the buttons and displays the icons next to the

On some models, if the active video input is a digital signal (HDMI or MHL input), the buttons have the following functions.Button Function1 Menu Open

A Technical specificationsNOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performa

About This GuideThis guide provides information on monitor features, setting up the monitor, using the software and technical specifications.WARNING!

Recognizing preset display resolutionsThe display resolutions listed below are the most commonly used modes and are set as factory defaults. This moni

Power adapterManufacturer Model number Power supply ratingDelta Electronic(S) Pte Ltd ADP 65-HB HCB 65W/19VPower adapter 25

B Support and troubleshootingSolving common problemsThe following table lists possible problems, the possible cause of each problem, and the recommend

Using the Auto-Adjustment feature (VGA analog input)When first setting up the monitor, when conducting a Factory Reset of the computer, or whenever yo

Optimizing image performance (VGA analog input)Two controls in the on-screen display can be adjusted to improve image performance: Clock and Phase (av

1. Press one of the three buttons on the right side of the monitor to activate the buttons.2. Press the Menu button on the right side of the monitor t

C LCD monitor quality and pixel policyThe TFT monitor uses high-precision technology, manufactured according to HP standards, to guarantee trouble-fre

iv About This Guide

Table of contents1 Product features ...

Downloading the software ... 19Using Auto-Sleep Mode ..

1 Product featuresThe monitor features include:●68.6 cm (27-inch) diagonal viewable area display with 1920 x 1080 resolution●Curved monitor with wide

2 Safety and maintenance guidelinesImportant safety informationA power cord is included with the monitor. If another cord is used, use only a power so

Maintenance guidelinesTo enhance the performance and extend the life of the monitor:●Do not open the monitor cabinet or attempt to service this produc