HP 14-e009tu Specifikace stáhnout pdf (Strana 69)

5. Open the computer.

6. Disconnect the following cables from the system board.

(1) Display panel cable

(2) Speaker cable

(3) USB board cable

7. Remove the Phillips PM2.5×3.5 screw (1) and the Phillips PM2.5×6.5 screw (2) that secure

the system board to the base enclosure.

8. Lift the right side of the system board (1) until it rests at an angle.

9. Disconnect the power connector cable (2) from the system board.

10. Remove the system board (3) by sliding it up and to the right at an angle.

Reverse this procedure to install the system board.

Component replacement procedures

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 113 114

Žádné komentáře

HP 14-e009tu Specifikace Strana 69