HP 425 Specifikace stáhnout pdf (Strana 68)

Remove the battery (see

Battery on page 51).

Remove the service door (see

Service door on page 52).

Remove the WLAN module:

1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The

white WLAN antenna cable is connected to the WLAN module “Aux” terminal.

2. Remove the two Phillips PM2.0×2.5 screws (2) that secure the WLAN module to the computer.

(The edge of the module opposite the slot rises away from the computer.)

3. Remove the WLAN module (3) by pulling the module away from the slot at an angle.

Reverse this procedure to install the WLAN module.

60 Chapter 4 Removal and replacement procedures

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 164 165

Žádné komentáře

HP 425 Specifikace Strana 68