HP 450 Specifikace stáhnout pdf (Strana 66)

Optical drive

NOTE: The optical drive spare part kit includes the rear optical drive bracket but does not include

the optical drive cable or cable bracket. The optical drive cable and cable bracket are included in the

optical drive cable kit. See

Optical drive cable on page 90 for more information about the optical

drive cable and cable bracket.

Description Spare part number

DVD±RW and CD-RW Super Multi Double-Layer Combo Drive 685096-001

Optical drive insert for use in models without an optical drive 702756-001

Before removing the optical drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 41).

5. Remove the memory module/wireless module compartment cover (see

WLAN module

on page 49).

6. Remove the hard drive (see

Hard drive on page 54).

To remove the optical drive:

1. Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer.

2. Insert a screwdriver or similar small tool into the hole at the rear of the optical drive bay, and

then push the optical drive (2) to release it from the bay.

58 Chapter 4 Removal and replacement procedures

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 141 142

Žádné komentáře

HP 450 Specifikace Strana 66