HP Compaq nx6110 Uživatelský manuál Strana 172

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 201
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 171
B–2 Maintenance and Service Guide
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries.
The length of the power cord set must be at least 1.5 m
(5.0
ft) and a maximum of 2.0 m (6.5 ft).
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the
country
where the power cord set will be used.
The power cord sets must have a minimum current capacity
of 10 amps and a nominal voltage rating of 125 or 250 V AC,
as required by each country’s power system.
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the notebook.
Zobrazit stránku 171
1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 200 201

Komentáře k této Příručce

Žádné komentáře