HP Notebook Series Uživatelský manuál stáhnout pdf (Strana 59)

5–10 Reference Guide

Add-On Devices

4. Insert the RAM board into the connector at about a 30-degree

angle until it is fully inserted. Then press down at both sides

until both latches snap closed.

5. Replace the cover.

6. Insert the battery pack.

To Remove a RAM Expansion Module

You may want to remove a RAM module so you can install a

larger one. You will need a small Phillips screwdriver for these

steps.

CAUTION: Your notebook internal components are extremely sensitive

to static electricity and can be permanently damaged by it. Handle the

RAM module only by its edges. Before installing the memory module,

discharge static electricity by touching the metal shielding around the

connectors on the back of the notebook.

1. Select Start > Turn Off Computer > Turn Off.

2. Unplug the AC adapter, if present, then remove the

battery pack.

3. Turn the unit bottom-side up, loosen the screws holding the

RAM cover, then remove the cover.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 101 102

Žádné komentáře

HP Notebook Series Uživatelský manuál Strana 59