HP Notebook Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Notebooky HP Notebook. HP Notebook User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 158
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
Startup and Reference Guide
HP Notebook Series
Document Part Number: 345561-001
September 2003
Part 1: Startup
The Startup part of this guide explains how to set up your
notebook for the first time.
Part 2: Reference
The Reference part of this guide explains how to identify and use
the hardware and software features on your notebook.
Enhanced for accessibility.
Zobrazit stránku 0
1 2 3 4 5 6 ... 157 158

Shrnutí obsahu

Strany 1 - Startup and Reference Guide

Startup and Reference Guide HP Notebook Series Document Part Number: 345561-001 September 2003 Part 1: Startup The Startup part of this guide exp

Strany 2 - Contents

Startup Setting Up the Software CAUTION: To prevent file corruption and ensure that the correct drivers are installed, install software only when the

Strany 3

Communications Using the Modem While Traveling Internationally An internal modem is configured to function in, and meet the operating standards of, th

Strany 4 - Setting Up the Hardware

Communications 3. Select the New button, then type a name for the new location in the Location Name field. 4. Select a country or region for the new

Strany 5 - Inserting a Battery Pack

Communications Check the Telephone Number Dial the telephone number on the telephone, verify that the remote modem is answering, then hang up. Check t

Strany 6 - Opening the Notebook

Communications 6. In the Phone and Modem Options window, select the Modems tab. 7. Select your modem > Properties button > Modem tab. 8. Clea

Strany 7

Communications Network All notebook models ship with an RJ-45 network jack. A network cable with RJ-45 connectors at each end is included with select

Strany 8 - Charging a New Battery Pack

Communications Connecting the Network Cable A network cable has an 8-pin RJ-45 network connector at each end and may contain noise suppression circuit

Strany 9 - Turning On the Notebook

Communications Turning a Network Connection Off and On To conserve power, turn off a network connection you are not using. To turn off a network conne

Strany 10 - Setting Up the Software

Communications Infrared The notebook is IrDA-compliant and can communicate with another infrared-equipped device that is also IrDA-compliant. The IrDA

Strany 11 - Installing Optional Software

Communications 7-14 Startup and Reference Guide––Part 2 Setting Up an Infrared Transmission For information about using infrared software and enablin

Strany 12 - Turning Off the Notebook

8 Hardware Options and Upgrades Contents Connecting a Powered Device... 8–2 Connecting a USB Devi

Strany 13 - Setting Up a Wireless Device

Startup Installing Optional Software Step-by-step instructions for installing and using many of the applications and utilities included with the noteb

Strany 14

Hardware Options and Upgrades Connecting a Powered Device To connect the notebook to an optional external device that has a power cord: 1. Be sure th

Strany 15 - Startup

Hardware Options and Upgrades The USB connectors on the notebook support USB 2.0- and 1.1-compliant devices. By default, USB devices function only whi

Strany 16 - Power Surges

Hardware Options and Upgrades Using a PC Card A PC Card is a credit card–sized accessory designed to conform to the standard specifications of the Per

Strany 17 - Viruses

Hardware Options and Upgrades Inserting a PC Card CAUTION: To prevent damage to the PC Card connectors: Use minimal face when inserting a PC Card int

Strany 18 - Using the Notebook Safely

Hardware Options and Upgrades Stopping and Removing a PC Card CAUTION: To prevent loss of work or an unresponsive system, stop the PC Card before rem

Strany 19 - Reference

Hardware Options and Upgrades Using an SD Card or MMC CAUTION: To prevent damage to the SD Card connectors: Use minimal force when inserting an SD Ca

Strany 20

Hardware Options and Upgrades Inserting an SD Card or MMC To insert an SD Card or MMC: 1. Hold the card label-side up with the connectors facing the

Strany 21 - Hardware

Hardware Options and Upgrades Removing an SD Card or MMC To remove an SD Card or MMC: 1. Close all applications and complete all activities that are

Strany 22 - Display

Hardware Options and Upgrades Increasing Memory You can increase the amount of RAM (random access memory) in the notebook with an optional HP-approved

Strany 23 - TouchPad

Hardware Options and Upgrades Removing or Inserting a Memory Module WARNING: To prevent exposure to electrical shock, access only the memory compartm

Strany 24 - Keys and Antenna

Startup Setting Regional and Display Preferences Keyboard language and other regional preferences, such as time, date, and currency format, are set in

Strany 25 - Power Controls

Hardware Options and Upgrades 5. Turn the notebook underside up. 6. Remove the memory compartment screw 1, then lift up and remove the memory compar

Strany 26 - Top: Lights

Hardware Options and Upgrades 7. Remove or insert the memory module. To remove a memory module: a. Pull away the retention clips on each side of the

Strany 27 - Audio Buttons and Speakers

Hardware Options and Upgrades To insert a memory module: a. Align the keyed (notched) edge of the module with the keyed area in the memory slot 1. b.

Strany 28

Hardware Options and Upgrades 8. Align the tabs on the memory compartment cover with the cover slots on the notebook, then tilt the cover downward un

Strany 29 - Connectors and Jacks

Hardware Options and Upgrades 8-16 Startup and Reference Guide––Part 2 Connecting an Optional Cable Lock The purpose of security solutions is to act

Strany 30 - Rear Panel: Vent

9 Software Updates, Restorations and Utilities Contents Updating Software... 9–2

Strany 31 - Left Side

Software Updates, Restorations and Utilities Updating Software For optimal notebook performance and to make sure your notebook remains compatible with

Strany 32 - Right Side

Software Updates, Restorations and Utilities Preparing for a Software Update If your notebook connects to a network, consult with your network adminis

Strany 33 - Underside

Software Updates, Restorations and Utilities 4. Use the down arrow key to select System Info, then press enter. (The ROM version and date are display

Strany 34 - Docking Connector and Vents

Software Updates, Restorations and Utilities Downloading and Installing a ROM Update CAUTION: To prevent serious damage to the notebook or an unsucce

Strany 35

Startup Setting Up a Wireless Device Your notebook model may have a Bluetooth device, a wireless LAN device, or no wireless devices. To display the n

Strany 36 - Cables and Cord

Software Updates, Restorations and Utilities Installing a ROM Update ROM installation procedures vary. Follow any instructions that are displayed on t

Strany 37 - Adapters and Battery Pack

Software Updates, Restorations and Utilities Downloading and Installing a Non-ROM SoftPaq To update software other than a ROM update: 1. Access the p

Strany 38 - Select This Guide

Software Updates, Restorations and Utilities Backing Up and Restoring Data The System Restore utility enables you to safeguard your system files and f

Strany 39

Software Updates, Restorations and Utilities Repairing or Reinstalling the Operating System The OS CD included with your notebook can be used to repai

Strany 40 - Keyboard

Software Updates, Restorations and Utilities 6. Press enter to continue. (A Licensing Agreement screen is displayed.) 7. Press F8 to accept the agreem

Strany 41

Software Updates, Restorations and Utilities 6. Press enter to continue. (A Licensing Agreement screen is displayed.) 7. Press F8 to accept the agreem

Strany 42 - Setting TouchPad Preferences

Software Updates, Restorations and Utilities Installing a Retail Version of an Operating System The Windows operating system provided on the notebook

Strany 43 - Hotkeys

Software Updates, Restorations and Utilities Navigating and Selecting in the Setup Utility Because the Setup utility is not Windows-based, it does not

Strany 44 - Hotkey Quick Reference

Software Updates, Restorations and Utilities Using the Support Utilities If you cannot solve a notebook problem by using this guide or the supplementa

Strany 45 - Hotkey Commands

Software Updates, Restorations and Utilities Startup and Reference Guide––Part 2 9-15 Using Support Telephone Numbers Obtaining Support Telephone Num

Strany 46 - Increase Brightness (Fn+F8)

Startup When the wireless device button is turned on, the wireless device light turns on and the integrated wireless devices are hardware enabled. Wh

Strany 47

A Specifications The information in this appendix may be helpful if you plan to use or transport the notebook internationally or in extreme environmen

Strany 48 - Identifying the keypad keys

Specifications Rated Input Power The notebook operates on DC power, which can be supplied by an AC or a DC power source. Although the notebook can be

Strany 49

Specifications Startup and Reference Guide––Part 2 A-3 Finding More Environmental Information The specifications in this appendix contain informatio

Strany 50

Index 1394 connector 2–9 A AC adapter 4–11 connecting 1–5, 4–11 disconnecting 4–11 identifying 2–17 power connector 2–12 AC power 1–16, 4–11 adapter

Strany 51 - Hibernation

Index switching to and from 4–11 when to use 7–3 critical low-battery condition 4–13 playing, with Windows Media Player 6–7 playing, with WinDVD 6–7 s

Strany 52 - Shutdown

Index currency formats, setting 1–10 customer support 2–18, 9–14 electric shock warning 1–16 electrical storm, safety issues 1–14 electrostatic discha

Strany 53

Index emergency shutdown procedures 1–10, 4–6 enablers, PC Card 8–4 End User License Agreement 1–8 environmental specifications A–1 error message No D

Strany 54 - Shutdown Procedures

Index initiate Standby 3–6, 4–7 media commands 3–7 Open Internet Explorer 3–6 Quick Reference 3–5 switch image 3–6 hub, USB 8–2 humidity specification

Strany 55

Index num lock 3–9 power/standby 2–6 wireless device 1–11, 2–6 line-out jack 2–8, 6–4 lock, security cable 8–15 locked system emergency shutdown proce

Strany 56

Index Norton AntiVirus 2003 1–15 notebook model, family, type, and serial number 9–2 NTSC television format 6–6 num lock key 3–9 light 2–6 number Prod

Strany 57

Startup The HP setup and configuration utility supports legacy operating systems and Cisco Compatible Extension program features. The Cisco Compatible

Strany 58 - Fn+F5 hotkeys, or

Index resetting with 4–6 power connector connecting 1–5 identifying 2–12 power cord connecting 1–5 surge protection 1–14 Power Meter 4–12 power, AC 1–

Strany 59 - Using Battery Power

Index security cable lock, connecting 8–15 connections 6–5 jack 2–9 switch, display 2–5 slot 2–12 serial number, notebook 2–15, 9–2 series, notebook

Strany 60 - Charging a Battery Pack

Index System Restore utility 9–6 T technical support 9–13 notebook documentation 2–18 telephone (RJ-11) jack connecting 7–3 identifying 2–9 modem cabl

Strany 61

Index W Wi-Fi certification 1–13 Windows applications key 2–4 Windows logo key 2–4 Windows Media Player accessing with Digital Audio button 6–7 using

Strany 62

Index Index-2 Startup and Reference Guide

Strany 63 - Calibrating a Battery Pack

Index Startup and Reference Guide Index-3

Strany 64

Index Index-4 Startup and Reference Guide

Strany 65 - Storing a Battery Pack

Index Startup and Reference Guide Index-5

Strany 66 - Procedures

Index Index-6 Startup and Reference Guide © 2003 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporat

Strany 67 - Replacing a Battery Pack

Startup 2. Press the wireless device button. (The wireless device light turns on.) 3. To install the HP setup and configuration utility: Select Star

Strany 68 - Battery Pack

Startup Protecting the Notebook Against Viruses When you use the notebook for email, network, or Internet access, you expose the notebook to computer

Strany 69 - Drives and Drive Media

Startup 1-16 Startup and Reference Guide—Part 1 Using the Notebook Safely This equipment has been tested and found to comply with the limits for a Cl

Strany 70 - Drive Media Terms

Part 2 Reference Startup and Reference Guide––Part 2

Strany 71

Contents 1 Startup 2 Hardware 3 Keyboard 4 Power 5 Drives and Drive Media 6 Multimedia 7 Communications 8 Hardware Options and Upgrades 9 Software

Strany 72 - Using the IDE Drive Light

Startup and Reference Guide––Part 2

Strany 73 - Inserting or Removing a Disc

2 Hardware Contents Display...……… 2–2 Top ……………………………………………….…. .. 2-3 TouchPad ……………………

Strany 74 - Removing a Disc (With Power)

Hardware Display Display Display release latch Opens the notebook. 2-2 Startup and Reference Guide––Part 2

Strany 75

Hardware Top TouchPad Top: TouchPad 1 TouchPad on/off button Enables/disables the TouchPad. 2 TouchPad* Moves the pointer and selects or activates

Strany 76 - Playing a Disc

Hardware Keys and Antenna Top: Keys and Antenna Fn key 1 Combines with other keys to perform system tasks. For example, pressing Fn+F7 increases scr

Strany 77 - Protecting Playback

Hardware Power Controls Top: Power Controls 1 Power button* When the notebook is: Off, pres to turn on the notebook. On, briefly press to initiate

Strany 78 - Setting the Boot Order

Hardware Lights Top: Lights 1 Num lock light On (green): Num lock or the internal keypad is on. 2 Caps lock light On (green): Caps lock is on. 3 Mu

Strany 79

Hardware Audio Buttons and Speakers Top: Audio Buttons and Speakers 1 Increase volume button Increases system volume. 2 Decrease volume button Decr

Strany 80

Hardware Front Panel Front Panel 1 SD (Secure Digital) Card light On: An SD Card or MMC is being accessed. 2 SD Cardslot Supports SD Cards and MMCs

Strany 81

Hardware Rear Panel Connectors and Jacks Rear Panel: Connectors and Jacks 1 External monitor connector Connects an optional VGA external monitor or

Strany 82

Part-1 Startup This Startup and Reference Guide provides information about setting up and using your notebook. To set up your notebook hardware and so

Strany 83 - Multimedia

Hardware Vent Rear Panel: Vent Exhaust vent* Provides airflow to cool internal components. To preven overheating, do not obstruct vents. Do not all

Strany 84 - Adjusting Volume

Hardware Left Side Left Side 1 PC Card slot Supports an optional TypeI or TypeII 32-bit (CardBus) or 16-bit PCCard. 2 PC Card eject button Ejec

Strany 85 - Using the Internal Speakers

Hardware Right Side Right Side 1 Antenna (available on select models and not visible from outside the notebook)* Sends and receives wireless device s

Strany 86 - Connecting an Audio Device

Hardware Underside Bays and Memory Compartment Underside: Bays and Memory Compartment 1 Battery bay Holds a battery pack. 2 Battery pack release lat

Strany 87 - Connecting an S-Video Device

Hardware Docking Connector and Vents Underside: Docking Connector and Vent 1 Docking connector* Connects the notebook to an optional port replicator.

Strany 88 - Fn+F4 hotkeys to

Hardware Labels The labels affixed to the notebook and some notebook components provide information you may need when troubleshooting system problems

Strany 89 - Using Multimedia Software

Hardware Additional Standard Components The components included with the notebook vary by region, country, notebook model, and the optional hardware o

Strany 90 - Managing DVD Region Settings

Hardware Adapters and Battery Pack Additional Standard Components: Adapters and BatteryPack 1 AC adapter Converts AC power to DC power. 2 Country-sp

Strany 91 - Using Easy CD Creator

Hardware Restoration and Documentation CDs CDs for repairing or reinstalling software and for obtaining supplementary information about the notebook a

Strany 92 - Responding to the UDF Prompt

Hardware Startup and Reference Guide––Part 2 2-19

Strany 93 - Formatting Recording Media

Startup Setting Up the Hardware To set up the notebook for the first time, you need the notebook, the AC adapter 1, the power cord 2, and the battery

Strany 94

3 Keyboard Contents TouchPad ... 3–2 Identifying TouchPad Components...

Strany 95

Keyboard TouchPad Identifying TouchPad Components The TouchPad includes the following components: 1 TouchPad 4 TouchPad on/off button 2 Left and rig

Strany 96

Keyboard Using the TouchPad The TouchPad provides the navigation, selection, and scroll functions of an optional external mouse. To move the pointer,

Strany 97 - Connecting the Modem

Keyboard Hotkeys Identifying Hotkeys Hotkeys are preset combinations of the Fn key 1 and one of the function keys 2. The icons on the function keys F

Strany 98

Keyboard Hotkey Quick Reference The following table identifies the default hotkey functions. For information about changing the function of the Fn+F5

Strany 99

Keyboard Hotkey Procedures To use a hotkeys command on the notebook keyboard, use either of the following procedures: Briefly press the Fn key, then b

Strany 100 - Internationally

Keyboard Initiate Standby (Fn+F5) The Fn+F5 hotkeys are set by default to initiate Standby. Standby can be initiated only while the notebook is on. If

Strany 101 - Check the Dialing Mode

Keyboard Play, Pause, or Resume an Audio CD or DVD (Fn+F9) The Fn+F9 hotkeys function only when an audio CD or DVD is inserted. If the audio CD or DVD

Strany 102 - Check the Dial Tone

Keyboard Keypad The keypad consists of 15 keys that can be used like the keys on an external keypad. When the keypad is turned on, each keypad key per

Strany 103 - Communications

Keyboard 3-10 Startup and Reference Guide––Part 2 Turning the Keypad On and Off When the keypad is off, press Fn+num lk 1 to turn the keypad on. When

Strany 104 - Network

Startup Inserting a Battery Pack To insert the battery pack into the battery bay: 1. Turn the notebook underside up on a flat surface. 2. Insert th

Strany 105 - Connecting the Network Cable

4 Power Contents Understanding Standby, Hibernation and Shutdown... 4–2 Standby...

Strany 106

Power Understanding Standby, Hibernation and Shutdown This section describes Standby, Hibernation, and shutdown and explains when to implement them. S

Strany 107 - Infrared

Power To determine whether the notebook is in Hibernation or turned off, press the power button: If the notebool is in Hibernation, your work returns

Strany 108

Power Choosing Standby, Hibernation or Shutdown If you plan to resume shortly: Initiate Standby for shorter times and Hibernation for longer times or

Strany 109 - Upgrades

Power Using Standby, Hibernation and Shutdown Procedures This section explains the default Standby, Hibernation, and shutdown procedures and includes

Strany 110 - Connecting a USB Device

Power Turning the Notebook or Display On or Off Task Procedure Results Turn on the notebook. Press the power button Pressing the power button turns

Strany 111

Power Initiating or Resuming from Standby Task Procedure Result User-initiated Standby With the notebook on, use either of the following procedures:

Strany 112 - Using a PC Card

Power Initiating or Restoring from Hibernation Task Procedure Result User-initiated Hibernation With the notebook on, use either of the following pr

Strany 113 - Inserting a PC Card

Power Setting Power Control Preferences By default, when the notebook is on: Briefly pressing the power button initiates Hibernation. Press the Fn+F5

Strany 114 - Removing a PC Card

Power Using Battery Power Identifying the Battery and Power/Standby Lights Battery pack procedures refer to the: 1 Power/standby light 2 Battery lig

Strany 115 - Using an SD Card or MMC

Startup Opening the Notebook To open the notebook: 1. Place the notebook display side up on a flat surface near an electrical outlet. 2. Slide the d

Strany 116 - Inserting an SD Card or MMC

Power Switching Between Battery and External Power The notebook switches between external power and battery power according to the availability of ext

Strany 117 - Removing an SD Card or MMC

Power Monitoring the Charge in a Battery Pack Obtaining Accurate Charge Information To increase the accuracy of all battery charge displays: Allow the

Strany 118 - Increasing Memory

Power Managing Low-Battery Conditions The information in this section describes default alerts and system responses. Identifying Low-Battery Condition

Strany 119

Power Calibrating a Battery Pack When to Calibrate Even if a battery pack is heavily used, it should not be necessary to calibrate it more than once a

Strany 120

Power If you use the notebook occasionally during the discharge procedure and have set energy-saving timeouts, expect the following performance from y

Strany 121 - Removing a memory module

Power Recharging the Battery Pack 1. Connect the notebook to external power and keep the notebook connected until the battery pack is fully recharged

Strany 122 - Inserting a memory module

Power Battery Conservation Settings and Procedures Using the following battery conservation settings and procedures extends the run time of a battery

Strany 123

Power Replacing a Battery Pack CAUTION: To prevent loss of work when removing a battery pack that is the only power source, initiate Hibernation or t

Strany 124

Power Startup and Reference Guide––Part 2 4-19 To insert a battery pack, insert the alignment tab on the battery pack into the alignment slot on the

Strany 125 - Restorations and Utilities

5 Drives and Drive Media Contents Understanding Drive and Drive Media Terms... 5–2 Caring for Drives and Drive Media ………………………… 5

Strany 126 - Updating Software

Startup Connecting the Notebook to External Power To connect the notebook to external AC power: 1. Plug the AC adapter cable into the power connector

Strany 127

Drives and Drive Media Understanding Drive and Drive Media Terms Hard drives are for the permanent storage of data files and of software such as syste

Strany 128

Drives and Drive Media Caring for Drives and Drive Media CAUTION: To prevent damage to the notebook or a drive and loss of work: Do not remove the in

Strany 129 - Downloading a ROM Update:

Drives and Drive Media Adding a Drive to the System The internal hard drive and optical drive are standard features of the notebook. The type of optic

Strany 130 - Installing a ROM Update

Drives and Drive Media Inserting or Removing a Disc Inserting a Disc 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to re

Strany 131

Drives and Drive Media Removing a Disc (With Power) 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media t

Strany 132

Drives and Drive Media Removing a Disc (Without Power) If the notebook is turned off or if no power is available, the release button on the optical dr

Strany 133 - Operating System

Drives and Drive Media Playing a Disc You can play a CD in a CD drive or a DVD drive. You can play a DVD only in a DVD drive. The information in this

Strany 134

Drives and Drive Media Protecting Playback CAUTION: Inserting or removing any device while running any multimedia application may pause or stop the p

Strany 135 - Software

Drives and Drive Media Setting the Boot Order By default, the notebook starts up from the internal hard drive. You can set the notebook to start up fr

Strany 136 - Using the Setup Utility

Drives and Drive Media 5. Turn the notebook underside up. 6. Remove the 2 hard drive retaining screws. Removing the hard drive retaining screws St

Strany 137 - Exiting the Setup Utility

Startup Charging a New Battery Pack The battery pack you inserted earlier begins to charge as soon as the notebook is connected to external power. Cha

Strany 138 - Using the Support Utilities

Drives and Drive Media 7. To remove a hard drive, grasp the hard drive assembly (the hard drive, the hard drive cover, and the hard drive bracket) us

Strany 139

Drives and Drive Media 8. To insert a hard drive, insert the 2 alignment tabs on the hard drive cover into the 2 alignment slots on the hard drive ba

Strany 140 - Specifications

Drives and Drive Media 9. If you have inserted a hard drive, reinsert the 2 hard drive retaining screws. (If you removed but did not replace a hard d

Strany 141 - Rated Input Power

6 Multimedia Contents Adjusting Volume ... 6–2 Using the Internal Speakers ……………

Strany 142 - Information

Multimedia Adjusting Volume Volume can be adjusted by using the audio buttons on the notebook or by using operating system or application volume contr

Strany 143

Multimedia Using the Internal Speakers The internal speakers play sound in stereo from applications, the operating system, games, drive media, the Int

Strany 144

Multimedia Connecting an Audio Device WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset. C

Strany 145

Multimedia Connecting an S-Video Device Connecting the Audio The S-Video jack supports video signals only. If you are setting up a configuration that

Strany 146

Multimedia Turning a Video Device On and Off To turn on a video device that is connected to the notebook, start or restart the notebook. Or, repeatedl

Strany 147

Multimedia Using Multimedia Software Using Windows Media Player Use Windows Media Player primarily for playing audio CDs. Although video CDs can be pl

Strany 148

Startup Turning On the Notebook To turn on the notebook, press the power button 1. When the notebook turns on, the power/standby light 2 turns on, and

Strany 149

Multimedia To play a DVD or video CD: 1. Insert the DVD or video CD into the optical drive. 2. Assign WinDVD to play the video: If the Microsoft Win

Strany 150

Multimedia 3. Select the Properties icon in the lower right corner of the window. 4. Select the General tab. 5. Select the button for the region. 6

Strany 151

Multimedia Preparing to Use Easy CD Creator CAUTION: To prevent loss of work and damage to a CD or DVD: Before writing to a CD or DVD, connect the no

Strany 152

Multimedia Formatting Recording Media You can purchase optical drive media that either are or are not formatted for DirectCD. To use DirectCD, use a C

Strany 153

Multimedia 6-12 Startup and Reference Guide––Part 2 Selecting Easy CD Creator Settings To use DirectCD, Easy CD Creator, or CD Copier, the default se

Strany 154

7 Communications Contents Modem... 7–2 Connecting the Modem..

Strany 155

Communications Modem All notebook models include an RJ-11 telephone jack, and some models ship with a preinstalled modem. A modem cable with RJ-11 con

Strany 156

Communications Connecting the Modem Selecting Connectors A modem must be connected to an analog telephone line. WARNING: To reduce the risk of electr

Strany 157

Communications Connecting a Modem to an RJ-11 Jack To connect a modem to an analog telephone line that has an RJ-11 telephone jack: 1. Identify the R

Strany 158

Communications Connecting a Modem with an Adapter To connect a modem to an analog telephone line that does not have an RJ-11 telephone jack: 1. Iden

Komentáře k této Příručce

Žádné komentáře