HP StorageWorks Edge Switch 2/16 Uživatelský manuál stáhnout pdf (Strana 129)

edge switch 2/16 product manager user guide 3–37

Configuring the Switch

Enable Telnet

Select this option from the Configure menu on the menu bar to place a check mark

in the check box to enable telnet access to the switch. Select the option again to

remove the check mark and disable telnet access. When disabled, users at remote

workstations cannot access the switch through telnet to use the Command Line

Interface (CLI) or perform other tasks. If enabled, hp recommends changing the

user names and/or passwords from their default values to prevent unauthorized

access.

Backing Up and Restoring Configuration Data

You can back up the NV-RAM configuration, which includes all of the data you input

through instructions in this chapter, using the Backup and Restore Configuration

option. This option is available through the Maintenance menu. Selecting this option

backs up the configuration data to a file on the HAFM server hard drive. The restore

function writes this data back to NV-RAM on the switch. Using the restore function

overwrites the existing configuration. For more information, refer to Backup and

Restore Configuration on page 5-6.

In addition to the Backup and Restore Configuration option, the Iomega QuikSync

application backs up configuration and other critical data from the HAFM server

automatically. As long as a Zip disk remains in the Zip drive of the HAFM server, data

backs up to the Zip disk whenever the directory contents change or you reboot the

HAFM server.

NOTE: We do not recommend changing the default QuikSync settings.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 193 194

Žádné komentáře

HP StorageWorks Edge Switch 2/16 Uživatelský manuál Strana 129