HP 706C Uživatelský manuál stáhnout pdf (Strana 64)

 



By responding to the

Enter Request:

message at the end of the main

configuration menu with "4" (Set Number of Printers), you may

change the number of printers.

IMPORTANT:

The lowest-numbered ports on the 706C, 708C and

710C Print Masters are reserved as printer ports. For example, the

Model 706C has a total of six available ports of which as many as five

may be printer ports with the remainder reserved as computer ports.

If you configure two printer ports on Print Master 706C, these would

be ports 1 and 2. If you configure four printer ports, these would be

ports 1, 2, 3, and 4. Printer ports may not be configured in any other

order.

Print Master will respond with:

Number of printers is....................1

Enter Number of Printers (1 to 5)........:

Enter the number of printers that you desire.

NOTE:

When the number of printers is changed, the printer

assignment number on all computer ports automatically resets to 0

(zero), putting the computers in the printer contention mode.

Print Master will save the new number of printers permanently in

non-volatile memory and return to the main configuration menu (

see

Section 7.2.1

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 122 123

Žádné komentáře

HP 706C Uživatelský manuál Strana 64