HP 72H3482 Uživatelský manuál

Turbo16/4 Token Ring Network ISA Adapter72H3482Installation Guide

2 Connecting to a Netware 4.11 ServerWindows for Workgroups❒ NetWare Client-32❒ NetBIOS❒ IEEE 802.28 Select the Continue button.9 At the “IBM LAN Clie

2 Connecting to a Netware 4.11 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• IBM Auto 16/4 TR adapter an

2 Connecting to a Netware 4.11 ServerWindows 95 SR27 Reboot the machine and allow it to boot to Windows 95.8 Windows 95 SR2 should automatically reco

2 Connecting to a Netware 4.11 ServerWindows 95 SR2“Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Wo

2 Connecting to a Netware 4.11 ServerWindows 95 SR2

3 Connecting to a Windows NT 3.51 ServerWindows for Workgroups3 Connecting to a Windows NT 3.51 ServerWindows for WorkgroupsRequirements• HP Vectra wi

3 Connecting to a Windows NT 3.51 ServerWindows for Workgroups5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configu

3 Connecting to a Windows NT 3.51 ServerWindows for Workgroups12 Select “IBM Turbo 16/4 Token-Ring ISA Adapter, NDIS2 only” and click on “OK.”13 Accep

3 Connecting to a Windows NT Server 3.51Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• IBM Auto 16/4 TR adapter

3 Connecting to a Windows NT Server 3.51Windows 95 SR210 When Windows 95 has loaded, click on “Start” then “Settings” and open the “Control Panel.”11

NoticeThe information contained in this document is subject to change without notice.Hewlett-Packard makes no warranty of any kind with regard to this

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version3.51Windows NT Workstation Version3.51Requirements• HP Vectra with Windows NT W

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version3.5110 Click on “YES” in the “Network Settings” dialog box, and NT Networking w

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version3.5125 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept t

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version3.51

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.0Windows NT Workstation Version 4.0Requirements• HP Vectra VL8 with Windows

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.010 In the Network Setup Wizard dialog box, make sure that “Wired to the Net

4 Connecting to a Windows NT 4.0 ServerWindows for Workgroups4 Connecting to a Windows NT 4.0 ServerWindows for WorkgroupsRequirements• HP Vectra with

4 Connecting to a Windows NT 4.0 ServerWindows for Workgroups5 Type “/VIEW” and verify the settings as listed above under the heading “Device Configur

4 Connecting to a Windows NT 4.0 ServerWindows for Workgroupson “OK.”13 Accept the default “Network Drivers” and click on “Close.”• IBM Token-Ring IS

4 Connecting to a Windows NT 4.0 ServerWindows for Workgroups

1 Connecting to a Netware 3.12 ServerWindows for Workgroups1 Connecting to a Netware 3.12 ServerWindows for WorkgroupsRequirements• HP Vectra VL8 with

4 Connecting to a Windows NT Server 4.0Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• IBM Auto 16/4 TR adapter

4 Connecting to a Windows NT Server 4.0Windows 95 SR27 Reboot the machine and allow it to boot to Windows 95.8 Windows 95 SR2 should automatically re

4 Connecting to a Windows NT Server 4.0Windows 95 SR2“Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name,

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version3.51Windows NT Workstation Version3.51Requirements• HP Vectra VL8 with Windows N

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version3.5110 Click on “YES” in the “Network Settings” dialog box, and NT Networking wi

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version3.5125 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept th

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 4.0Windows NT Workstation Version 4.0Requirements• HP Vectra VL8 with Windows N

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 4.010 In the Network Setup Wizard dialog box, make sure that “Wired to the Netw

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 4.026 At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept th

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 4.0

1 Connecting to a Netware 3.12 ServerWindows for Workgroups❒ NetWare Client-32❒ NetBIOS❒ IEEE 802.28 Select the Continue button.9 At the “IBM LAN Clie

Version Number IBM Turbo 16/4 Rev.1

1 Connecting to a Netware 3.12 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra with Windows 95 SR2 installed.• IBM Auto 16/4 TR adapter an

1 Connecting to a Netware 3.12 ServerWindows 95 SR27 Reboot the machine and allow it to boot to Windows 95.8 Windows 95 SR2 should automatically reco

1 Connecting to a Netware 3.12 ServerWindows 95 SR2“Workgroup”, and “Computer Description” and click on “OK.” (If you do not have a Computer name, Wo

1 Connecting to a Netware 3.12 ServerWindows 95 SR2

2 Connecting to a Netware 4.11 ServerWindows for Workgroups2 Connecting to a Netware 4.11 ServerWindows for WorkgroupsRequirements• HP Vectra VL8 with