HP AD583C Uživatelský manuál stáhnout pdf (Strana 39)

e1200-320 4Gb Fibre Channel Interface Card user and service guide 39

Real-Time Clock configuration

The Real-Time Clock screen is used to set the system time and date (see Figure 22).

Figure 22 Real-Time Clock screen

Date/time settings:

• Date Settings sets the month, day, and year (use a four-digit number to represent the year)

• Day of Week sets the day of the week.

• Time Settings sets the hours, minutes, and seconds.

The system clock is a 24-hour clock. There is no a.m. or p.m. designation. Example 1:00 p.m. is 13

hours, 00 minutes.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 131 132

HP StorageWorks 1
Contents 3
About this guide 7
HP technical support 8
1Introduction 9
Operation indicators 10
Processing SCSI information 11
External indicators 12
Operating environment 12
Removal and installation 14
Installing a new card 16
Table 4 Cable connections 18
Number Description 18
Interfaces and connections 20
Ethernet connection 21
Serial port connection 21
3 Device management 23
Discovery 24
Logical unit management 24
26 Device management 26
4 Interface card management 27
Command Line Interface 28
Visual manager 28
Inband SCSI-3 commands 29
30 Interface card management 30
Visual manager access 31
Main menu 32
Home page 33
System menu 34
Serial configuration 35
Network configuration 36
Active fabric configuration 37
Real-Time Clock configuration 39
Reset menu 40
Ports menu 41
SCSI bus configuration 43
Discovery menu 44
2. Select Go 45
Mapping menu 46
Statistics menu 48
Utilities menu 49
FTP utility access 50
Trace settings configuration 51
Event log settings 52
Event log display 53
Clear event log 54
SCSI command tracking 54
Report menu 55
Reboot option 56
Power-up messages 57
Perform configuration 58
Baud rate configuration 59
Ethernet configuration 60
Fibre Channel configuration 62
Parallel SCSI configuration 65
SCSI initiator menu 66
Maximum SCSI bus speed menu 67
Device mapping 68
Adding an entry 69
Creating an entry 70
Remove gaps 71
Deleting an entry 71
Adding a host 72
Deleting a host 73
Editing a host 73
Trace configuration 75
Event configuration 76
Real-Time clock configuration 78
System utilities 79
System statistics menu 80
Channel fabric 81
Table 7 Fibre Channel status 81
Event Log 84
Runtime report 84
Diagnostics mode 85
Special FC link control 86
Get a copy of trace buffer 87
7Using the FTP interface 89
90 Using the FTP interface 90
Updating firmware 91
92 Using the FTP interface 92
8Troubleshooting 93
Basic verification 94
Verify SCSI bus configuration 95
Verify configuration 96
Verify mapping 96
Verify devices 96
Verify host configuration 96
Running diagnostics 97
Technical support 97
98 Troubleshooting 98
RJ-11 pin assignments 99
DB-9 pin assignments 100
Regulatory compliance 103
Laser device 104
European Union notice 105
BSMI notice 105
Battery statement 106
Japanese notice 106
Korean notices 106
C Inband SCSI-3 commands 109
Inquiry command 110
EVPD Page 0x80 111
112 Inband SCSI-3 commands 112
Indexed addressing option 115
SCC addressing option 115
Interface Card 117
Serial and Telnet interfaces 118
Visual Manager 121
Glossary 123

Komentáře k této Příručce

Žádné komentáře

HP AD583C Uživatelský manuál Strana 39

Komentáře k této Příručce

Související produkty a manuály pro Sítě HP AD583C