
Security Management System CLI Reference 11
The security level and restrictions for entering user names and passwords. The default setting is 2 from the
following options:
Usage
password
ping
Checks network connectivity by sending a ICMP request to the specified destination, and then checking on
an echoed response.
Usage
ping [-options] hostNameOrAddress
Table 2-2 Security Levels
Level Description
Level 0 User names cannot have spaces in it.
Passwords are unrestricted.
Level 1 User names must be at least 6 characters long without spaces.
Passwords must be at least 8.
Level 2 Passwords must meet Level 1 restrictions and the following:
• Must contain at least two alphabetic characters.
• Must contain at least one numeric character.
• Must contain at least one non-alphanumeric character (examples
include ! ? $ * #).
NOTE: Do not use spaces in the password.
Table 2-3 ping Options
Option Description
-c count
Stop after sending count packets.
-i wait
Wait wait seconds between sending each packet. The default is to wait for
one second between each packet.
-n
Numeric output only. No attempt will be made to lookup symbolic names
for host addresses.
-q
Quiet output. Nothing is displayed except the summary lines at startup time
and when finished.
-r
Bypass the normal routing tables and send directly to a host on an attached
network. If the host is not on a directly-attached network, an error is
returned. This option can be used to ping a local host through an interface
that has no route through it.
-s packetsize
Specifies the number of data bytes to be sent. The default is 56, which
translates into 64 ICMP data bytes when combined with the 8 bytes of
ICMP header data.
-v
Verbose output.
Komentáře k této Příručce