HP 425s Uživatelský manuál

Technical white paper Displaying a custom logo during bootup of HP commercial notebook systems HowTo Table of contents Introduction 2 Determi

10 Call to action For more information, please contact your HP representative or go to hp.com/go/notebooks. Get connecte

2 Introduction HP provides several methods that customers can use to replace the HP logo with their own logo on the splash screen that appears duri

3 EREPLOGO.EFI Utility For the BIOS 2012 generation, run the EREPLOGO.EFI utility from an EFI shell. The .EFI utility puts your custom logo image

4 Figure 1: The FAT32 file system option Instructions for running EREPLOGO.EFI from the EFI shell 1. Boot the system, and then press the f10 key

5 7. Select the USB Key from the list, as shown in the example in Figure 3. Figure 3: The USB key option 8. From the EFI File Navigator, search

6 Figure 5: Steps 9, 10, and 11 12. Refer to EREPLOGO.EFI syntax to start using the tool. You can use the tool to write or erase a custom logo, a

7 Image requirements The image must meet the following requirements: • .bmp file format for systems using BIOS 08 • .jpg file format for systems us

8 C:\> EREPLOGO /e HPQ EFI BIOS Logo Replace - Version 1.01 Copyright 2008 - Hewlett-Packard Corporation Logo erased from EFI BIOS Done. Adding

9 Figure 6: The Custom Logo option disabled in the f10 menu If you enable the Custom Logo option, the following priorities apply: • If there is a