HP 4400 Dual Controller Enterprise Virtual Array Uživatelský manuál stáhnout pdf (Strana 40)

dust covers or dust caps provided by the manufacturer. These covers are removed during installation,

and should be installed whenever the transceivers or cables are disconnected.

The transceiver dust caps protect the transceivers from contamination. Do not discard the dust

covers.

CAUTION: To avoid damage to the connectors, always install the dust covers or dust caps

whenever a transceiver or a fiber cable is disconnected. Remove the dust covers or dust caps from

transceivers or fiber cable connectors only when they are connected. Do not discard the dust covers.

To minimize the risk of contamination or damage, do the following:

• Dust covers—Remove and set aside the dust covers and dust caps when installing an I/O

module, a transceiver or a cable. Install the dust covers when disconnecting a transceiver or

cable.

One of the many sources for cleaning equipment specifically designed for fiber optic connectors

is:

Alcoa Fujikura Ltd. 1-888-385-4587 (North America)

011-1-770-956-7200 (International)

40 EVA4400 operation

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 138 139

Žádné komentáře

HP 4400 Dual Controller Enterprise Virtual Array Uživatelský manuál Strana 40