HP A2969A Uživatelský manuál stáhnout pdf (Strana 23)

Figure 5. Installing the adapter in the I/o bulkhead

8. Press down on the rear of the SCSI adapter until its connector is fully

inserted into the receptacle on the core I/O or expansion I/O adapter.

9. Secure the adapter by tightening the two retaining screws (Iocated on the

front of the core I/O or expansion YO bulkhead).

10. If the SCSI adapter was installed in the expansion I/O, record the expansion

I/O slot number for future reference.

11.

Re-install the core I/O or expansion I/O. Refer to the computer system

manual for information on re-installing the core I/O or expansion I/O.

Installation Procedures 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 54 55

Žádné komentáře

HP A2969A Uživatelský manuál Strana 23