HP Compaq Elite 8300 Touch All-in-One Uživatelský manuál stáhnout pdf (Strana 9)

TouchMD Computer Setup

(version December 2012)

5. Using

a Torx or Flathead screwdriver,

four screws attaching the computer stand to the

back of the computer and lift it away from the

computer. SAVE THE S

CREWS (these will be used to

attach the VESA adpter plate to the computer). Give

the stand to the office contact for storage.

Place the VESA adapter plate over the rails on the

back of the computer, matching the cutouts on each

side of the plate

with the screw holes and the hooks

on the rails.

Attach the VESA adapter plate using the

fours screw removed in

the previous

Slide the VESA adapter plate upward until it locks

into place. You will hear a click when the VESA

adapter

plate is locked into place. NOTE: if you do

not hear the click or the plate does not lock into

place, it means the two brake screws were not

sufficiently tightened when the computer stand was

removed. You will need to remove the VESA adapter

plate and repeat steps 10, and 13