HP Pro 3380 Specifikace stáhnout pdf (Strana 114)

To remove, replace, or add an expansion card:

1. Prepare the computer for disassembly (

Preparation for Disassembly on page 94).

2. Remove the access panel (

Access Panel on page 95).

3. Locate the correct vacant expansion socket on the system board and the corresponding

expansion slot on the back of the computer chassis.

4. Release the slot cover bracket by removing the screw that secures the bracket, and then lifting

the bracket off the computer.

Figure 8-10 Opening the expansion slot bracket

5. Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be

attached to the expansion card.

a. If you are installing an expansion card in a vacant socket, remove the appropriate

expansion slot cover on the back of the chassis. Pull the slot cover straight up then away

from the inside of the chassis.

104 Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 217 218

Žádné komentáře

HP Pro 3380 Specifikace Strana 114