HP Vizualize,Visualize b2000 Specifikace stáhnout pdf (Strana 38)

38 Chapter2

Parts Replacement Procedures

Floppy Drive

3. Rotate the workstation around until you see the front of the workstation as shown in Figure

2-27

Figure 2-27 Front of Workstation with the Front Bezel Removed

4. Remove both ﬂoppy disk bracket screws (T-15 Torx/slotted screws) and pull the ﬂoppy disk

bracket out of the chassis assembly as shown in Figure 2-28. Next remove the four ﬂoppy disk

blank ﬁller screws (T-15 Torx/slotted screws) as shown in Figure 2-28 and remove the blank

from the bracket. You are now ready to mount the ﬂoppy disk drive into the ﬂoppy disk bracket.

Figure 2-28 Removing the Floppy Disk Bracket and Blank

Floppy Drive

Blank

Blank Filler Screws

T-15 Torx

Screw

Blank

Bracket

(T-15 Torx Screws)

Blank Screw

(T-15 Torx Screw)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 86 87

Žádné komentáře

HP Vizualize,Visualize b2000 Specifikace Strana 38