HP Workstation x2000 Uživatelský manuál stáhnout pdf (Strana 13)

HP x2000 Service Information

Mass Storage Device Guide Rails

Chapter 1 13

Mass Storage Device Guide Rails

Extra guide rails are attached to the side of the front access cage for

additional mass storage device installations. Depending on the device to

be installed, dedicated guide rails are required and are easily recognized

by their distinct size and color.

The following table indicates the device, location, and required rails.

Device to be

Installed

Location Required

Rails

Installing the Rails

3.5-inch device

(hard disk drive)

3.5-inch

internal

shelf (two

shelves)

Narrow blue

leftand right

rails

Insert the guide rail labeled

“L” on the left-hand side

(cable connectors facing

towards you and positioned

atthe bottom),and theguide

rail “R” on the right-hand

side of the hard disk drive.

5.25-inch device

(CD-ROM, etc.)

5.25-inch

front access

cage shelf

Wide green

rails

There is no speciﬁc side to

which these guides must be

installed. However, they

must be inserted in the two

holes located at the bottom

of the drive.

3.5-inch device

(ﬂoppy, zip drive,

etc.)

Narrow

green left

and right

rails

Carefullybreak off themetal

plate from the chassis.

Insert the guide rail labeled

“L” on the left-hand side

(cable connectors facing

towards you and positioned

at the top), and the guide

rail “R” on the right-hand

side of the hard disk drive.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Komentáře k této Příručce

Žádné komentáře

HP Workstation x2000 Uživatelský manuál Strana 13

Komentáře k této Příručce

Související produkty a manuály pro Barebones pro PC / pracovní stanice HP Workstation x2000