Hp Spectre x2 Uživatelský manuál stáhnout pdf (Strana 39)

Speakers

Description Spare part number

Speaker Kit (includes left and right speakers and cables) 830348-001

Before removing the speakers, follow these steps:

1. Turn off the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and then

shut it down through the operating system.

2. Disconnect the power from the slate by unplugging the power cord from the slate.

3. Disconnect all external devices from the slate.

4. Remove the display panel assembly (see Display panel assembly on page 20).

Remove the speakers:

1. Disconnect the speaker cables (1) from the system board.

2. Remove the four Phillips PM2.0×3.4 screws (2) that secure the speakers to the bottom cover.

3. Remove the speakers (3).

Reverse this procedure to install the speakers.

Component replacement procedures 29

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 70 71

Žádné komentáře

Hp Spectre x2 Uživatelský manuál Strana 39