HP Jetdirect 620n Fast Ethernet Print Server Instalační manuál Strana 40

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 54
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 39
HP Jetdirect EIO Control Panel Menus 40
ENWW
CONFIG
METHOD
Specifies the method that TCP/IP
parameters will be configured on the
Jetdirect print server.
O BOOTP: Use BootP (Bootstrap
Protocol) for automatic configuration
from a BootP server.
O DHCP: Use DHCP (Dynamic Host
Configuration Protocol) for automatic
configuration from a DHCP server. If
selected and a DHCP lease exists,
DHCP RELEASE and DHCP
RENEW menus will be available to set
DHCP lease options.
O AUTO IP: Use automatic link-local IP
addressing. An address in the form
169.254.x.x will be automatically
assigned.
O MANUAL: Use the Manual Settings
option to configure TCP/IP
parameters.
DHCP RELEASE This menu appears if CONFIG METHOD
was set to DHCP and a DHCP lease for
the print server exists.
O NO (default): The current DHCP lease
is saved.
O YES: The current DHCP lease along
with the leased IP address are
released.
DHCP RENEW This menu appears if CONFIG METHOD
was set to DHCP and a DHCP lease for
the print server exists.
O NO (default): The print server does
not request to renew the DHCP lease.
O YES: The print server requests to
renew the current DHCP lease.
Table C-2. EIO Graphical Control Panel Menu (2 of 5)
Menu Item Options Description of settings
Zobrazit stránku 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Komentáře k této Příručce

Žádné komentáře