Hp StudioJet Uživatelský manuál stáhnout pdf (Strana 55)

Chapter 5: Troubleshooting

Take-up roll never rotates, paper loop is too long in front of machine.

Cause:

1. Take-up motor is unplugged.

2. Dancer bar is below the lower

sensor.

3. Lower sensor does not work.

Solution:

1. Plug in the take-up motor.

2. Roll paper up by pressing and

holding the Unroll and Right

Arrow key.

3. Contact Ioline customer service.

Take-up roll does not stop; paper is pulled tight in front of machine.

Cause:

1. Operator accidentally activated

the lower sensor when the

dancer bar was higher than the

upper sensor.

2. The upper sensor doesn’t work.

Solution:

1. Press Start/Stop 2 times, then

press and hold the Unroll key

to move the dancer bar to the

Top sensor.

2. Contact Ioline customer service.

Take-up roll rotates when no dancer bar is in the machine.

Cause:

1. The operator accidentally

tripped the lower sensor.

Solution:

1. Activate the upper sensor by

touching the sensor glass face.

Common Issues

(FlexJet E Models only)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 70 71

Žádné komentáře

Hp StudioJet Uživatelský manuál Strana 55