HP OfficeConnect Router Series Uživatelský manuál stáhnout pdf (Strana 27)

Static IP Mode

To setup the Router for use with a static IP address connection,

use the following procedure:

Figure 18 Static IP Mode Screen

1 Enter your IP Address in the IP Address text box.

2 Enter your subnet mask in the Subnet Mask text box.

3 Enter your ISP Gateway address in the Internet (ISP) Gateway

Address text box.

4 Enter your primary DNS address in the Primary DNS Address text

box.

5 If your ISP provides a secondary DNS address, enter it in the

Secondary DNS Address text box, otherwise leave the box blank.

6 Click Next to continue.

Dynamic IP Address Mode

To setup the Router for use with a dynamic IP address

connection:

Figure 19 Hostname Screen

1 If your ISP requires the addresses of a Primary and Secondary

DNS Server then enter them in the fields labelled Primary DNS

Address and Secondary DNS Address.

If your ISP does not require one of the fields to be filled in then

leave it blank.

2 If your ISP requires you to supply a host name enter it in the Host

Name box, otherwise leave the box blank.

3 Click Next to continue to the Clone MAC Address screen, shown

in Figure 20

below.

dua08609-5aaa01.book Page 27 Thursday, September 11, 2003 12:15 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 111 112

Žádné komentáře

HP OfficeConnect Router Series Uživatelský manuál Strana 27