HP Server tc2110 Uživatelská příručka Strana 80

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 118
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 79
Chapter 7 Replacing Parts
Mass Storage Devices
Figure 7-1. Mass Storage Device Locations
Removing the Flexible Disk Drive
1. If the Server is operating, power down the Server, and if necessary, backup mass storage devices.
Refer to Chapter 1, “Controls and Indicators” for instructions.
2. Disconnect the power cord and any external cables connected to the Server.
If necessary, label each one to expedite re-assembly.
3. Remove the left side cover.
4. Remove the upper bezel.
5. At the rear of the flexible disk drive (FDD), carefully disconnect the power and data cables.
6. Remove the flexible disk drive:
a. Press in on both release tabs to release the FDD assembly.
b. Pull the FDD assembly out of the chassis.
c. Remove the two screws from the side of the FDD assembly.
74
Zobrazit stránku 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 117 118

Komentáře k této Příručce

Žádné komentáře