HP Fabric Clustering System for InfiniBand Instalační manuál

Procházejte online nebo si stáhněte Instalační manuál pro Softwarové licence / aktualizace HP Fabric Clustering System for InfiniBand. HP Fabric Clustering System for InfiniBand Installation Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 9
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
AT083A HP Fabric Clustering System PCIe
2-port 4X QDR Fabric Adapter Installation
Guide
HP-UX Integrity Server Networking
HP Part Number: AT083-9000A_ed2
Published: February 2011
Edition: 2.0
Zobrazit stránku 0
1 2 3 4 5 6 7 8 9

Shrnutí obsahu

Strany 1 - Edition: 2.0

AT083A HP Fabric Clustering System PCIe2-port 4X QDR Fabric Adapter InstallationGuideHP-UX Integrity Server NetworkingHP Part Number: AT083-9000A_ed2P

Strany 2

© Copyright 2011 Hewlett-Packard Development Company L.PLegal NoticesThe information in this document is subject to change without notice.Hewlett-Pack

Strany 3 - Table of Contents

Table of Contents1 HP PCIe 2-port 4X QDR Fabric Adapter Installation...5HP Fabric Clustering System Ins

Strany 4 - List of Figures

List of Figures1-1 Inserting the Host Channel Adapter...74

Strany 5

1 HP PCIe 2-port 4X QDR Fabric Adapter InstallationThis document gives installation information for the HP Fabric Clustering System Host ChannelAdapte

Strany 6

• Check the cluster configuration plan for information on where to install adapters, switches,and cable guides, and where cables are to be routed.• Ch

Strany 7 - $ /usr/sbin/swinstall

2. Install the carda. Slide the adapter edge-connector into the PCIe slot until it is fully seated.b. Secure the card and reassemble the system.Figure

Strany 8 - Regulatory Information

5. Change the Source Host Name, if necessary, and then enter the mount point of the drive inthe Source Depot Path field. Select the OK button to retur

Strany 9 - Regulatory Information 9

FCC RFI StatementThis device complies with part 15 of the FCC Rules for Class A Apparatus. Operation is subjectto the following two conditions: (1) Th

Komentáře k této Příručce

Žádné komentáře