
OfficeConnect Gigabit VPN Firewall User’s Manual Chapter 3. Quick Start Guide
19
Table 3.2 lists some of the most important default settings; these and other
features are described fully in the subsequent chapters. If you are familiar with
network configuration settings, review the settings in Table 3.2 to verify that they
meet the needs of your network. Follow the instructions to change them if
necessary. If you are unfamiliar with these settings, try using the device without
modification, or contact your ISP for assistance.
Before you modifying any settings, review Chapter 4 for general information
about accessing and using the Configuration Manager program. We strongly
recommend that you contact your ISP prior to changing the default configuration.
Table 3.2 Default Settings Summary
DHCP (Dynamic
Host Configuration
Protocol)
DHCP server enabled
with the following pool
of addresses:
192.168.1.2 through
192.168.1.254
The OfficeConnect Gigabit
VPN Firewall maintains a pool
of private IP addresses for
dynamic assignment to your
LAN computers. To use this
service, you must have set up
your computers to accept IP
information dynamically, as
described in Part 2 of the
Quick Start Guide. See section
5.2 for an explanation of the
DHCP service.
Static IP address:
192.168.1.1
subnet mask:
255.255.255.0
This is the IP address of the
LAN port on the OfficeConnect
Gigabit VPN Firewall. The
LAN port connects the device
to your Ethernet network.
Typically, you will not need to
change this address. See
section 5.1 LAN IP Address for
instructions.
Komentáře k této Příručce