Hp MPX200 Multifunction Router Uživatelský manuál stáhnout pdf (Strana 22)

Syntax

destroy host

Keywords

Specifies the symbolic name for the new host.-host_id

For an explanation of the general keywords that apply to all commands, see “General keywords”

(page 12)

Examples

c:\>rcli destroy host -host_id=myHost /ip=10.0.0.12[10.0.0.12]

Host successfully removed

disable beacon

The disable beacon command disables flashing the router LEDs.

Syntax

disable beacon

Example

c:\> rcli disable beacon /ip=10.0.0.12 [10.0.0.12]

Beacon successfully turned OFF

disable fc_port

The disable fc_port command disables the specified Fibre Channel port.

Syntax

disable fc_port -port=port number

Example

c:\> rcli disable fc_port -port=1 /ip=10.0.0.12

FC Port 1 successfully disabled

disable io_statistics

The disable io_statistics command stops collection of data for read/write block counts

and I/O counts for a single LUN or for all LUNs.

NOTE: This command is supported with router firmware version 3.1.0.0 or later.

Syntax

disable io_statistics

Keywords

Specifies the WWPN of the storage array for which you want to stop collecting

data.

-array_wwpn=

Specifies the Fibre Channel target WWPN of the storage array for which you want

to stop collecting data.

-array_with_fc_target=

22 Command reference

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 119 120

Žádné komentáře

Hp MPX200 Multifunction Router Uživatelský manuál Strana 22