Hp StorageWorks 2.12 Edge Switch Uživatelský manuál stáhnout pdf (Strana 181)

Optional Features

181Edge Switch Element Manager User Guide

Enable/Disable Switch Binding

Use the following procedure to enable or disable Switch Binding:

1. Click Configure > Switch Binding > Change State. The Switch Binding

State Change dialog box displays.

Figure 61: Switch Binding State Change dialog box

2. Perform one of the following steps:

— To disable Switch Binding, click Enable Switch Binding to clear the

Enable Switch Binding check box, then click Activate.

— To enable Switch Binding, click Enable Switch Binding to add a check

mark. Then, go to step 3 to set the Connection Policy.

3. Click one of the Connection Policy option buttons.

— Restrict E_Ports. Click this option if you want to restrict connections

from specific switches to switch E_Ports. Switch WWNs can be added to

the Switch Membership List to allow connection and can be removed

from the Membership List to prohibit connection. Devices are allowed to

connect to any F_Port.

— Restrict F_Ports. Click if you want to restrict connections from specific

devices to switch F_Ports. Device WWNs can be added to the Switch

Membership List to allow connection and can be removed from the

Membership List to prohibit connection. Switches are allowed to connect

to any E_Port.

— Restrict All. Click if you want to restrict connections from specific

devices to switch F_Ports and switches to switch E_Ports. Device and

switch WWNs can be added to the Switch Membership List to allow

connection and can be removed from the Membership List to prohibit

connection.

4. Click Activate to enable the changes and close the dialog box.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 245 246

Žádné komentáře

Hp StorageWorks 2.12 Edge Switch Uživatelský manuál Strana 181