Hp StorageWorks 3000 RAID Array Uživatelský manuál Strana 92

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 112
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 91
3-30 RAID Array 3000 Controller Shelf Hardware Users Guide
Compaq Confidential Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Controller Shelf Hardware Users Guide Comments:
Part Number: EK-SMCPQ-UG. D01 File Name: d-ch3 Installation and Maintenance.doc Last Saved On: 12/4/00 1:08 PM
Replacing the RAID Controller
CAUTION: When you remove the controller, the airflow through the shelf is
reduced. Always install the replacement unit immediately to prevent
overheating.
1. Ensure the SCSI bus connected to the SBB is quiescent (no I/O activity).
2. Grip the two locking latches on the front panel of the controller and pull
them forward until the controller disengages from its mounting slot
(Figure 3-17).
3. Remove the controller by sliding it forward and free of the shelf.
4. Transfer the SIMMs to the new controller.
5. Insert the replacement controller into the open slot, align the module
into the card guides, and gently slide it into the shelf until the connector
engages the backplane connector in the shelf.
6. Turn the two front panel latches inward to seat the controller in the shelf
slot.
7. Restore the configuration using SWCC.
S
HR-1
0
6
2
Figure 3-17. Removing the controller from the shelf
Zobrazit stránku 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 111 112

Komentáře k této Příručce

Žádné komentáře