Hp StorageWorks Auto Path VA Software Uživatelský manuál stáhnout pdf (Strana 64)

autopath set device

64 HP Auto Path XP: User’s Guide (Windows NT/2000)

autopath set device

Set load-balancing policy or preferred path

Syntax autopath set device=device_number { policy=policy_name |

path=path_number }

device_number The Auto Path index number shown in the autopath

devices command line display.

policy_name The load balancing policy name. For a list of load

balancing policies, see “Setting the load balancing

policy” (page 42).

path_number The preferred path number.

Description The autopath set device command sets the load balance policy for the

device specified by the device number.

If no load balancing is set for a device, the autopath set device command

sets the preferred path to the device.

Examples

HP Auto Path> autopath set device=1 policy=round_robin

Device Name: HP OPEN-3

Device Serial No. : 0400756000E2

Change Load Balance policy (y/n) ? y

Load Balance policy changed. Verify by issuing "autopath" command

HP Auto Path> autopath set device=1 path=2

Device Name: HP OPEN-3

Device Serial No. : 0400756000E2

Controller Port No. : 22

Path Scsi Address : 3.4.1.0

Change Preferred Path (y/n) ? y

Preferred Path changed. Verify by issuing “autopath” command

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70

Žádné komentáře

Hp StorageWorks Auto Path VA Software Uživatelský manuál Strana 64