Hp XP Array Manager Software Uživatelský manuál stáhnout pdf (Strana 34)

a. Select the desired mode (Bind or Priority) in the Cache Residency Mode box.

b. Select the desired Pre-staging Mode setting (Yes or No).

Note: To set the pre-staging function, the Pre-staging check box (upper-left corner of the

Cache Residency window) must already be selected.

c. Verify the starting and ending addresses of the area to be placed in Cache Residency

cache in the Start and End fields. Edit as needed. Make sure that the Select All Area box

is NOT checked.

Caution: Be sure to select the correct options, since the options cannot be changed after data

is added to cache. To change between bind mode and priority mode, or enable/disable the

pre-staging function, you must first release the cache extent that you want to change (see

“Releasing Specific Data from Cache Residency Cache” (page 40)), and then place the data

back into Cache Residency cache with the desired settings.

5. If you do not want to apply the same options to any other LDEVs, make sure that the Multi Set

/ Release box is not checked, click Set, and then click OK on the confirmation dialog box.

The requested Cache Residency operation is displayed in blue in the LDEV information table.

To apply the same options and data range to additional LDEVs:

a. Select the Multi Set / Release box in the Cache Residency window, click Set, and then

click OK to open the Multi Set dialog box. The Multi Set dialog box (“Multi Set Dialog

Box” (page 30)) displays the data range and options selected in the Cache Residency

window.

b. On the Multi Set dialog box, select the desired CU image, and select the desired LDEV(s).

The data range and options displayed on the dialog box will be applied to all selected

LDEVs.

c. Click Set to return to the Cache Residency window. The requested Cache Residency

operations are displayed in blue in the LDEV information table.

6. Repeat steps 2 through 5 until all desired operations are listed.

Note: You cannot use the Release button until you apply (or cancel) the requested operation(s).

7. Verify the Pre-staging setting:

• To enable pre-staging, select Pre-staging.

• To disable pre-staging, clear Pre-staging.

8. To start the operation(s), click Apply:

• If Pre-staging was selected, respond to the Yes/No confirmation that displays. To continue

with pre-staging, click Yes. To continue without it, click No.

• To cancel the operation, click Cancel and then click OK on the confirmation that displays.

9. Monitor the Cache Residency window to make sure that the operations complete successfully.

The cache information area (see “Cache Information Area” (page 24)) displays the progress

of the requested operation(s).

34 Performing Cache Residency Manager Operations

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 51 52

Komentáře k této Příručce

Žádné komentáře

Modèles	Type de document
RX35Q	Manuel de l'utilisateur BCM RX35Q User`s manual, 64 pages
BC133KT-100	Manuel de l'utilisateur BCM BC133KT-100 User`s manual [en] , 54 pages
RX945G	Manuel de l'utilisateur BCM RX945G User`s manual, 69 pages
MX965Q	Manuel de l'utilisateur BCM MX965Q User`s manual [en] , 52 pages
SQ575	Manuel de l'utilisateur BCM SQ575 User`s manual, 47 pages
IN845GVD	Manuel de l'utilisateur BCM IN845GVD User`s manual, 44 pages
MX945GSE3	Manuel de l'utilisateur BCM MX945GSE3 User`s manual, 52 pages
QS440VA	Manuel de l'utilisateur BCM QS440VA User`s manual, 59 pages
IN915GVE	Manuel de l'utilisateur BCM IN915GVE User`s manual [en] , 48 pages
BC845EVL	Manuel de l'utilisateur BCM BC845EVL User`s manual, 43 pages
MX690E2	Manuel de l'utilisateur BCM MX690E2 User`s manual, 74 pages
QS750	Manuel de l'utilisateur BCM QS750 User`s manual, 50 pages
GT133KT	Manuel de l'utilisateur BCM GT133KT User`s manual [en] , 45 pages
RX67Q	Manuel de l'utilisateur BCM RX67Q User`s manual, 88 pages
RX815ELT	Manuel de l'utilisateur BCM RX815ELT User`s manual, 44 pages
MX266	Manuel de l'utilisateur BCM MX266 User`s manual, 53 pages
BC845DL	Manuel de service BCM BC845DL Service manual, 214 pages

Hp XP Array Manager Software Uživatelský manuál Strana 34

Komentáře k této Příručce

BCM BC45Q manuels

Bcm BC45Q Manuel de l'utilisateur (73 pages)

Table des matières

Plus de produits et de manuels pour Cartes mères BCM

Hp XP Array Manager Software Uživatelský manuál Strana 34

Komentáře k této Příručce

Související produkty a manuály pro Úložný prostor Hp XP Array Manager Software

BCM BC45Q manuels

Bcm BC45Q Manuel de l'utilisateur (73 pages)

Table des matières

Plus de produits et de manuels pour Cartes mères BCM