Hp XP RAID Manager Software Uživatelský manuál stáhnout pdf (Strana 13)

Table 10 Supported Platforms: IPv4 vs IPv6

RAID Manager / IPv6IPv4

OpenVMSTru64LinuxWindowsAIXSolarisHP-UX

N/AAVAVN/AAVAVAVHP-UXRAID

Manager

/ IPv4

N/AAVAVN/AAVAVAVSolaris

N/AAVAVN/AAVAVAVAIX

N/AAVAVN/AAVAVAVWindows

N/AAVAVN/AAVAVAVLinux

N/AAVAVN/AAVAVAVTru64

AVAVAVN/AAVAVAVOpenVMS

N/AAVAVN/AAVAVAVIRIX64

Legend:

AV: Available for communicating with different platforms.

N/A: Not applicable (Windows LH does not support IPv4 mapped IPv6).

Minimum platform versions for RAID Manager/IPv6 support:

• HP-UX: HP-UX 11.23 (PA/IA) or later

• Solaris: Solaris 8/Sparc or later, Solaris 10/x86/64 or later

• AIX: AIX 5.1 or later

• Windows: Windows 2008(LH), Windows 2003 + IPv6 Install

• Linux: Linux Kernel 2.4 (RH8.0) or later

• Tru64: Tru64 v5.1A or later. Note that v5.1A does not support the getaddrinfo() function, so this must be specified

by IP address directly.

• OpenVMS: OpenVMS 8.3 or later

• UDP ports: Contact your network administrator for appropriate UDP port numbers to use in your network. The

network administrator must enable these ports to allow traffic between RAID Manager servers. If you define a

HORCM_MON IP address in your configuration definition file, the port defined in this entry must be enabled.

Requirements and restrictions for z/Linux

In the following example, z/Linux defines the Open Volumes that are connected to FCP as /dev/sd*.

Also, the mainframe volumes (3390-xx) that are connected to FICON are defined as /dev/dasd*.

Requirements and restrictions for z/Linux 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 94 95

Žádné komentáře

Hp XP RAID Manager Software Uživatelský manuál Strana 13