HP Tape Uživatelský manuál stáhnout pdf (Strana 46)

Note Write the model name, product number, serial number, and SCSI ID of your drive somewhere safe

for future reference. The model name is on the front of the drive and the product and serial numbers

are on a label on the top of the drive.

1 Slide the tape drive into the open bay, aligning the tray or rails with the slots in the bay, as shown

in figure 4.

If your computer does not use mounting hardware, check that the holes in the chassis are aligned with

the holes in the side of the tape drive.

Do not secure the drive with screws at this point because you may have to move the drive to get the

cables into place.

2 Install a SCSI host adapter in the selected server or workstation now, if necessary. For information on

SCSI host requirements, see page 3.

Dlt1getstart_int.fm Page 13 Thursday, November 16, 2000 1:47 PM

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 85 86

Žádné komentáře

HP Tape Uživatelský manuál Strana 46