HP AG321A Rychlý návod

HP StorageWorks MSL LibraryExtenderGetting started guide andreplacement instructionsSee page 9 for instructions on removing or replacingthe Extender.©

3 Repackaging the Library ExtenderFollow these steps to package the removed Library Extender for returnto Hewlett-Packard.Insert the cardboard support

Place the protected Extender in the shipping box.Secure the box with packaging tape.Replacing the ExtenderTo replace the Extender, continue with Step

5 Disabling extended modePower on both Libraries.Disable Extended mode for both Libraries from their Configuration >System menus.Power each Library

2 Downloading product documentationFor information about configuring and operating the extended library,download the HP StorageWorks Library Extender

7 Removing the cartridges from theLibrariesBefore installing the Extender, the Libraries must be installed in the rackrails supplied with the Librarie

Obtain adequate assistance to lift and stabilize the Library duringremoval and replacement.From the front of the Library 1) completely loosen the scre

10 Relocating tape drivesThe extender is installed in the bottom half-height drive bay of the upperLibrary and the top half-height drive bay in the lo

13 Aligning the LibrariesBefore installing the Extender, the Libraries must be aligned horizontally.Loosen each of the captive screws inside the left

16 Powering on the extended libraryPower on both Libraries. The Libraries can be powered on in either order.The initialization sequence is faster when

17 Configuring the extended libraryThe extended library appears to the host as a single library. The upperLibrary is always the master Library.Default

HP StorageWorks MSL LibraryExtenderRemoving or replacingThe Library Extender is a mandatory customer self re-pair part. HP customer self repair (CSR)