HP JetAdvantage Security Manager 10 Device E-LTU Uživatelský manuál stáhnout pdf (Strana 49)

 PIN Required to store a print job to device memory - All Save To Device Memory Jobs must be

PIN protected. We do not allow non-PIN jobs to be started. The PIN check box is not visible,

this is because it is always enabled when this feature is enabled. The PIN does not have to be

a certain length when this feature is used by itself.

 PIN Required for Print Driver Stored Jobs - Jobs cannot be stored on the device unless they

have a PIN assigned to access the job.

 Cancel stored jobs without a PIN - All print jobs not previously saved via the Save To Device

Memory App that do not have a PIN will be canceled upon being sent to the printer or being

printed. A warning icon will appear and the status message will tell the user the job has been

canceled when it occurs. In Job status the details of the cancel will pertain to this feature.

 All PINs must be 4 digits – the PIN must be 4 digits in length before the job can be stored.

Retain Print Jobs After Reboot

The job retention item controls whether print jobs are retained on the device after it is restarted. Select

the check box to assess this item, and then select whether to enable or disable job retention. Today

all temporary stored jobs sent from a print driver are deleted at reboot. This feature provides a

configuration option to retain these stored jobs after a power cycle. Changes to this option will

immediately affect existing stored jobs (if the feature is turned on, all stored jobs will be preserved

even those that were stored when the feature was turned off).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 115 116

Žádné komentáře

HP JetAdvantage Security Manager 10 Device E-LTU Uživatelský manuál Strana 49