HP OmniBook 2000/5700 Uživatelský manuál stáhnout pdf (Strana 46)

Installing an Operating System

Reinstalling Windows for Workgroups

2-6

Reinstalling Windows for Workgroups

The following procedure describes how to restore Windows for Workgroups and

your original OmniBook software.

The entire recovery process takes approximately 1 hour. To recover your Windows

for Workgroups operating system, you’ll need a CD-ROM drive, floppy disk drive,

your Windows for Workgroups backup disks, your MS-DOS 6.22 backup disks, the

Recovery CD, and the Support Utility disk. If you don’t have backup disks, you can

make them—see “To make DOS 6.22 and Windows for Workgroups disks.”

To reinstall Windows for Workgroups

1. If you have an internal CD -ROM drive , connect the floppy disk drive to the

OmniBook’s parallel port and install the CD-ROM drive in the OmniBook.

–or–

If you have a SCSI CD -ROM drive and a docking system , connect the SCSI

CD-ROM drive to the docking system and install the floppy disk drive in the

OmniBook.

–or–

If you have a PC card or parallel port CD -ROM drive , connect the PC card or

Parallel CD-ROM drive and install the floppy disk drive in the OmniBook. See

“To set up a PC card or parallel port CD-ROM drive” on page 3-15.

2. Connect the ac adapter to the OmniBook.

3. Insert the Support Utility floppy disk.

4. Reset the OmniBook.

The DOS 6.22 Startup menu appears.

5. Click option 4:

Create Hibernate Partition (erases Hard Disk)

6. When prompted for “Hibernate” partition size, you can continue with the

default 64M byte Hibernate partition or choose an alternate size based on

the amount of system RAM installed.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Žádné komentáře

HP OmniBook 2000/5700 Uživatelský manuál Strana 46