HP ProDesk 498 G3 Base Model Microtower PC Uživatelský manuál stáhnout pdf (Strana 15)

Removing an optical drive bezel blank

On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank before

installing an optical drive. To remove the bezel blank:

1. Remove the computer access panel and front bezel.

2. To remove the bezel blank, press upward on the bottom tab and press downward on the top tab on the

side of the blank (1), and then rotate the blank off the front of the bezel (2).

Replacing the front bezel

Insert the three hooks on the bottom edge of the bezel into the rectangular holes on the chassis (1), and then

rotate the top side of the bezel onto the chassis (2) and snap it into place.

Removing an optical drive bezel blank 9

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 46 47

Žádné komentáře

HP ProDesk 498 G3 Base Model Microtower PC Uživatelský manuál Strana 15