HP ProDesk 600 G3 Base Model Microtower PC Uživatelský manuál stáhnout pdf (Strana 32)

Installing a hard drive

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, then turn o any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to

the internal components of the computer.

5. Remove the computer access panel. See Removing the computer access panel on page 7.

6. You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket similar to

the example shown below.

●

Slide the 2.5-inch drive into the bay adapter bracket, ensuring the connector on the drive is fully

inserted into the connector on the adapter bracket.

26 Chapter 2 Hardware upgrades

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 48 49

Žádné komentáře

HP ProDesk 600 G3 Base Model Microtower PC Uživatelský manuál Strana 32