HP RP7 Retail System Model 7100 Uživatelský manuál stáhnout pdf (Strana 13)

Cleaning plastic surfaces

Exterior plastic surfaces and scan windows exposed to spills, smudges, or debris require periodic cleaning to

ensure optimal performance during scanning. Use a soft, dry cloth to clean the product.

If the product is heavily soiled, clean the plastic surfaces with a soft cloth moistened with a diluted non-

aggressive cleaning solution or isopropyl alcohol (minimum 70%).

Recommended cleaners for standard plastics are Formula 409® glass and surface cleaner, dish soap and

water, and Windex® Original (Blue).

IMPORTANT: Do not use abrasive or aggressive cleansing agents or abrasive pads to clean scan windows,

contacts, or plastics.

Do not spray or pour liquids directly onto the unit.

Be sure to turn o power and unplug the device from the electrical source before cleaning.

Be sure the device is completely dry before powering it up.

Cleaners and liquids may be harsh on metal contacts and are recommended for use only on enclosures.

Cleaning electrical contact surfaces

Regular cleaning of electrical contacts is needed to guarantee correct recharging of the battery. Clean the

contacts on both the scanner and the cradle.

Proper operation could be aected if spills, smudges, or debris accumulate on the cradle and/or the scanner.

To maintain proper operation, periodic cleaning is recommended.

Do not use brushes or any other hard tool to remove grime from electrical contacts because they can damage

or scratch the contact’s plating.

Scanner contacts

●

Use a soft, dry cloth to clean the contact area and the plastic surface around the contacts.

●

Be sure to remove dust, dirt, and any cloth residue.

Cleaning procedure 7

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 37 38

Žádné komentáře

HP RP7 Retail System Model 7100 Uživatelský manuál Strana 13